Easy Wheel Weight Installation

Tricks and tips for mounting tires, weights and more.

Moderators: Barnyard, Team Cub

Mark In Richmond
5+ Years
5+ Years
501 Club
501 Club
Posts: 588
Joined: Mon Sep 17, 2007 9:06 pm
Zip Code: 23069
Location: Central Virginia

Easy Wheel Weight Installation

Postby Mark In Richmond » Mon Mar 10, 2008 10:06 pm

Here's some Redneck engineering:

Get a 2 X 8 board (my length was 56 inches) a piece of ½" inch stock rod.

Using the upper hole in the wheel disk, mark the wood.

Drill 31/64 hole in the 2 X 8 and drive the ½" rod into the hole.

Place wheel weight on rod, lift into place slide onto wheel disk and install to side bolts.

Remove rod and install the two additional bolts. It took me three minutes each side.
How To Easily Install Wheel Weights

Image

Image

Image

Image

Return to “Steering, Tires/Wheels and Weights”

Who is online

Users browsing this forum: No registered users and 0 guests