Adjusting Valves
Take the carb off, take the inspection plate off. (also easier if you remove the manifold.)
Remove #1 sparkplug (the one closest to the radiator.)
Rotate engine till both valves in #1 close. Look in the hole. & the pointer is at the notch in the crank pulley. #1 is at TDC at this point.
Check clearance on 1, 2,3 & 5. Adjust to .015 clearance cold.
Rotate engine 360 degrees until #4 is at TDC.
Check clearance on 4, 6, 7, & 8. Also adjust to .015 cold clearance.
Repeat and double check everything.
Get a new gasket from TM (one of our sponsors) or use good sealant and install the cover plate.
Install the manifold (if removed), the carb and any spark plugs you took out.
It should now run much better without the clatter.
Good luck and keep posting.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
How To Adjust Valves
-
- 10+ Years
- Posts: 2758
- Joined: Wed Apr 23, 2008 10:10 am
- Zip Code: 70401
- Tractors Owned: 3 barns full of Cubs and implements in various stages of disrepair
- Location: LA, Hammond
How To Adjust Valves
Louisiana Cub Fest, March 5 & 6, 2010
http://ihc31.com/cubfest
Gary Boutwell
Hammond, LA
3 barns full of Cubs of various condition
http://ihc31.com/cubfest
Gary Boutwell
Hammond, LA
3 barns full of Cubs of various condition
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 917
-
by Don McCombs
Sun Feb 12, 2023 12:26 pm
-
- 9
- 365
-
by Gary Dotson
Sat Mar 04, 2023 8:51 am
-
- 7
- 1334
-
by EdHarbur
Tue Sep 06, 2022 11:34 am
-
-
Pulling touch control valves
by ShawnAgne » Sun Dec 05, 2021 8:15 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 11
- 679
-
by workinonit
Mon Sep 19, 2022 6:30 pm
-
-
-
Farmall A valves stuck open
by darkeagle10x » Mon Oct 16, 2023 11:10 am » in Farmall A, Super A, AV, 100, 130 & 140 - 16
- 1879
-
by darkeagle10x
Sun Dec 03, 2023 7:34 pm
-
Return to “Engine, Clutch, Transmission and Hydraulics”
Who is online
Users browsing this forum: No registered users and 2 guests