This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Charging Test Schematics

Batteries, magnetos, distributors, wiring harnesses and more.
User avatar
birddog
10+ Years
10+ Years
Posts: 505
Joined: Fri May 05, 2006 12:00 am
Zip Code: 54515
Circle of Safety: Y
Location: WI, Catawba

Charging Test Schematics

Postby birddog » Thu Jul 26, 2012 12:56 pm

These tests shown here are for a Cub 6 volt Pos. ground generating system with regulator. They may work with other systems but care needs to be taken. Even polarizing some systems is different and if done improperly the regulator can be shorted out.

I’ve set up these tests to basically correspond with the flow chart that is often referred to and posted on this site.( Find it here. download/file.php?id=9047&mode=view )This may or may not be the best way to test but I figure it is some thing we are all familiar with. Also doing it this way you don’t have to have a meter, but it would be helpful if you suspect or you determine that the gauge is the problem. When I do the photo mock up, gauges will be used. Like in the ignition tests if you see something wrong let me know.

One thing I’ve noticed in my experience is that it isn’t uncommon for an AMP gauge to work in one direction and not the other.

And coming soon to a forum near you, will be the photo version. I've got the test stand/ mock up working. The next step will be to set up the tests and take pictures.

Image

Image

Image

Image

Image
Mark "birddog" Birdeau
Circle of Safety

SPONSOR AD

Sponsor



Sponsor
 

Return to “Ignition/Electrical”

Who is online

Users browsing this forum: No registered users and 2 guests