The following steps only work if you have wood working tools available...
1) Take a small piece of hardwood and plane it down to the correct thickness (23/32"), or as close as you can using a caliper to measure the board.
2) Then take a new seal and trace an outline of it on the board. Cut the outline out of the board on the inside of the line, so it's a bit smaller in diameter than the seal.
3)Cut out another circle, larger than the seal and stack it on the first circle you cut out. This will create a "lip" so that the seal isn't driven in too far. Drill a hole through both and bolt them together.
4) Now you have a driver that is the correct size as to equalize the contact points, and thickness so that the seal is set to the proper place.
I've made a few like this and they work great!
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Mag Oil Seal Installation Tool
-
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
-
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: Mag oil seal n stall question
When I get to Fla, I'll get the dimensions and a few pics for everyone. It's real easy to make if you have the right tools. I used the lathe on mine to get it nice and perfect, but not in a chuck. I just squeezed the boards up between the tailstock and motor after the rough cut with a scroll saw. The lathe dimples in the wood created the center points for the drill press to create the holes necessary to bolt them together.
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6
- 296
-
by Stanton
Tue Jul 20, 2021 6:20 am
-
- 0
- 131
-
by smallfarm
Sat Jun 26, 2021 8:18 am
-
- 10
- 520
-
by Greenthumbfarms
Sun Jan 23, 2022 3:24 pm
-
-
1-point Fast Hitch for Cub - Installation Attachment(s)
by lakesurfer » Sun Mar 03, 2024 1:56 pm » in Farmall Cub - 19
- 600
-
by staninlowerAL
Tue Apr 02, 2024 4:44 am
-
-
- 11
- 276
-
by Bob McCarty
Mon Apr 10, 2023 4:38 pm
Return to “Ignition/Electrical”
Who is online
Users browsing this forum: No registered users and 1 guest