This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

How To Oil The Generator With The Hood On

Batteries, magnetos, distributors, wiring harnesses and more.
Clem
10+ Years
10+ Years
Posts: 2707
Joined: Wed Oct 12, 2005 8:28 am
Zip Code: 48463
Tractors Owned: 1956 FAST HITCH CUB
MODEL 10 CUB TRAILER
2 1950 Demonstrators
Location: MICHIGAN, OTISVILLE

How To Oil The Generator With The Hood On

Postby Clem » Tue Oct 21, 2008 8:14 pm

EVER WONDER WHAT THESE HOLES ARE FOR?

Image

You can oil your generator with the hood on by using these holes.

Start by shutting your tractor off and running a coat hanger down one hole and into the generator cup. You'll need to feel around and flip the cup cap if one is present.

Image
There are two oil cups on the generator. The wire will fit in the cups and go into them enough to allow you to leave the wire in the generator long enough to place a few drips of oil on the top of the wire. The oil will run down the wire and into the generator.

Image


Try using a straight wire with no kinks. There are many ways to "skin a cat" this is just one of many ways to oil a generator.
Image

SPONSOR AD

Sponsor



Sponsor
 

Return to “Ignition/Electrical”

Who is online

Users browsing this forum: No registered users and 1 guest