Farmall Cub

Purchased my first Cub last month, a 1948 "barn find"!!! Hasn't run for over 6 yrs and am currently in the process of rebuilding the engine! It was stuck tho not badly, did have to have couple valve seats replaced!! Not really in too bad of shape, under the 2 inches of "barn dust" & dried grease! Tires were in good shape with minor weather cracking!! I am currently retired due to a disability from a truck accident 3yrs ago, was a diesel tech for state highway dept of Roads for 27+yrs pryer to the accident! I rebuild (restore?) old tractors, have farmalls (1948 cub,1943 H, 2 F20s, 450G, 560D, 1066) and massey harris (1938 101, 1941 101 jr., Pony, 22, 30, 33, 44,)mostly, with addition to a 1947 E3 coop, a 1945 allis chalmers c, a 1947 ford 2n and a Satoh 650g! Not all have been restored!!!! Have found this to be a very friendly and informative site!

Welcome to the Forum. Sounds like you've got a barn full. If you need any help or have any questions, feel free to ask. I'm in Longmont, Colorado.

Bob

G'day and congrats on acquiring your 1st Cub. You definitely are into old iron .. that is quite the variety. Sounds like you are enjoying yourself. Good for you. Being disabled just means we have to find alternate methods of doing things ...

to Farmallcub.com Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to the Welcome Wagon wherein you will find links to many useful sites and topics. One of the most important resources are Owner's Manuals, Parts Catalogs and Service Manuals. The Cub Manual Server is the home of the jpg versions and the [url=http://www.farmallcub.com/[ Sorry, direct links to manual section is not allowed. ]/index.php]PDF Manuals[/url] -- well the pdf's of course Enjoy!.

Welcome to the forum! Good to see another Cornhusker out there, I am a part-time one, I have a place about 40 miles south of you, between Albion and St. Edward in the big berg of Boone! I have not seen many Cubs around there, good to hear you found one, best of luck with it.

Welcome to the forum. Glad to have you here. With your experience, you may have a few answers to share to others questions. Regardless, if you do have any questions, please ask.

You can click on the "Member Map" in the header above to reveal who may be close to you.

Welcome from the deep south. Sit back and enjoy.