Page 1 of 1
New from Markham Ontario
Posted: Sun Jun 30, 2013 7:42 pm
by DH1
Just joined the site, I have a Demonstrator Cub with a bad motor and today I picked up another cub with a good motor.
Want to make 1 good tractor out of these 2.
Re: New from Markham Ontario
Posted: Sun Jun 30, 2013 7:53 pm
by Bob McCarty
Hi Doug, Welcome to the Forum. You'll find lots of friendly and knowledgeable Cubbers here. If you need any help, feel free to ask away.
Bob
Re: New from Markham Ontario
Posted: Sun Jun 30, 2013 8:14 pm
by RaymondDurban
Welcome to the forum!!
Re: New from Markham Ontario
Posted: Sun Jun 30, 2013 8:57 pm
by Rudi
Doug:
Congrats on the Demo and the parts Cub
another member of the MCC and another fellow Canuck to boot
Been to Markham a number of times in the 70's and 80's when I lived in Timmins, Kingston and Ottawa. Nice area.
You might want to spend a little time following the links below .. we have lots of resources for our members. Also .. just so you know -
to Farmallcub.com
Forum Family. And you have come to the right place for all things Cub related. If you click on the
Site Rules, Regulations, & Important Information, it will point you to
the
Welcome Wagon wherein you will find links to many useful sites and topics. One of the most important resources are Owner's Manuals, Parts Catalogs and Service Manuals. The
Cub Manual Server is the home of the jpg versions and the [url=http://www.farmallcub.com/[ Sorry, direct links to manual section is not allowed. ]/index.php]PDF Manuals[/url] -- well the pdf's of course
Enjoy!.
Re: New from Markham Ontario
Posted: Tue Jul 02, 2013 7:48 am
by Mike in Louisiana
Welcome to the forum Doug.
Re: New from Markham Ontario
Posted: Tue Jul 02, 2013 10:49 am
by John *.?-!.* cub owner
welcome to the forum, and before you realize what you are doing you will decided you need 2 cubs, and they both will be fixed. All of the parts are interchangeable, so switching is easy. What is wrong with the engine on the demo? locked up, oil burner, etc?
Re: New from Markham Ontario
Posted: Wed Jul 03, 2013 5:36 am
by randallc
Welcome to the forum from Arkansas, and agree with John, check out the problems with the demo, might just be an easy fix.