Page 1 of 1
Hydraulic Farmall Cub
Posted: Tue Feb 07, 2012 8:57 pm
by beefsquad1
Good Day All, I have a 1948 Farmall Cub restored. I am looking to put a hydraulic system on the tractor. I am not sure what I will need exactly in regards to the system. Pump, lines, hydraulic block... Am I on the right track? I want to ultimately put a three point system on the tractor. Please let me know. Thanks
Benjamin
Re: Hydraulic Farmall Cub
Posted: Tue Feb 07, 2012 9:29 pm
by RaymondDurban
Welcome to the Forum Benjamin!
Installation of hydraulics on a Cub is not that difficult. Everything is bolt on. You will need the pump, the lines, the touch control unit and the control lever. Check the "For Sale section" on this site, the parts frequently are there for sale at any given time.
Re: Hydraulic Farmall Cub
Posted: Wed Feb 08, 2012 7:39 am
by Gary Dotson
And when you add the 3 point, you'll also need a rear rock shaft and linkage rod.
Re: Hydraulic Farmall Cub
Posted: Wed Feb 08, 2012 10:36 am
by Rudi
Benjamin:
G'day
Raymond and Gary got you covered. Suggest you follow the links below - lots of information/resources available to our members. In regards to your specific query, you can find the part #'s in the TC-37 Series Parts Catalogs and how to install it in the Blue Ribbon Service Manuals.
Re: Hydraulic Farmall Cub
Posted: Wed Feb 08, 2012 11:01 am
by Mike in Louisiana
Benjamin, Welcome to the forum.
Re: Hydraulic Farmall Cub
Posted: Wed Feb 08, 2012 12:03 pm
by Stanton
Welcome! Post some pics of your tractor when you can. Help in posting pics is here:
viewtopic.php?f=20&t=61040