Page 1 of 1
Just wanted to say hi
Posted: Mon Aug 09, 2010 9:26 am
by newkentnate
New member here.....I have my great-grandfathers '47 that I am just beginning to restore. So far, I have rebuilt the IH carb and replaced the points, rotor, cap, plug and wires, etc. Was able to get it started this weekend with just some fuel in the bowl (probably been about 20 years since it was last started), so now it's time to get down to business. As I'm new to the the process of doing anything mechanical short of changing oil, I'm sure I'm going to have TONS of questions. Just wanted to say HI and I look forward to posting some pics along the way!!
Re: Just wanted to say hi
Posted: Mon Aug 09, 2010 10:37 am
by Bob McCarty
Welcome!! As you probably know, 1947 was the first year of production for the Cub. What's your serial number? If you spend a few minutes browsing the tool bar above, you'll find lots of information. We're ready and willing to help you with any questions or problems you may encounter.
Bob
Re: Just wanted to say hi
Posted: Mon Aug 09, 2010 1:09 pm
by Rudi
Congrats
on being the caretaker for your Great Grandfather's 47 Cub
It is really special when a family heirloom like that Cub gets passed down through the generations. Please do follow the links below as there is a ton of information that you will find useful from the manuals, parts catalogs, service manuals and How To's. I think you will probably like it here a lot
Re: Just wanted to say hi
Posted: Mon Aug 09, 2010 2:55 pm
by newkentnate
Its pretty early...circle Cub in the low 3,000's. Super excited
Re: Just wanted to say hi
Posted: Mon Aug 09, 2010 3:52 pm
by Bezirk
Welcome aboard, These folks really know the Cubs inside and out and are very friendly and willing to help. They have been a great help to me, and I have made some very good friends at the "Fests". I have a 49 and it is truly a fun tractor to own, I'm glad your's stayed in the family.
Berlin
Re: Just wanted to say hi
Posted: Mon Aug 09, 2010 6:14 pm
by Winfield Dave
Welcome....you will love it on this forum....
- picsplease.gif (1.16 KiB) Viewed 347 times
Re: Just wanted to say hi
Posted: Tue Aug 10, 2010 3:36 am
by johnny j
Welcome to the forum
Re: Just wanted to say hi
Posted: Sun Aug 15, 2010 1:34 pm
by Mike in Louisiana
Welcome to the forum. Great bunch of guys and gals here to help you with your tractor.