This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

New Member - Old Farmall Cub Enthusiast

Post your introduction and "get to know me" information in this forum.
BudTuba
10+ Years
10+ Years
Posts: 3
Joined: Sun Oct 11, 2009 9:56 am
Zip Code: 14546

New Member - Old Farmall Cub Enthusiast

Postby BudTuba » Sun Oct 11, 2009 10:21 am

Hi,

I'm going by the name BudTuba because among other things, I am a tuba player in a Dixieland Band near Rochester, NY. I live on 6 acres and have been doing "gentleman farmer" things out here since 1972. In about 1978 I bought a 1954 Farmall Cub with several accessories: land plow, sickle bar, cultivators. Later on I bought of front push blade and use that in the winter to plow my driveways. I also bought an belly mower of the Mott type. This has a horizontal shaft and many small blades attached to short rods welded to the shaft. This works well with regular mowing of grass, but the height of the Cub is a problem when clearing under trees. Consequently, I bought a Ferris mower that I use to mow the roughly 2 acres lawn.

I rebuilt the engine in the mid-1980's and somewhere along the line bought an International Cub carburetor to gain power. I still have the original carburetor that I would be willing to sell if someone is trying to rebuild one and wants the original parts. I also converted it to 12 volts negative ground and have a charged-capacitor ignition on it. Since the starter spins over faster than with 6 volts, this really helps starting on good days. I have to nurse the engine with the choke control for a minute or two for it to start and run smoothly.

Herein lies my problem. Even when warmed up, I sometimes have to pull the choke out when starting up or pulling tree, etc. I do not understand why this happens since the governor seems to be working OK, but possibly I need to readjust that. Any help on this issue would be useful to me. I will repost this section of my message as a seperate problem, considering that some people are less likely to look through the new member's posts.

I would be glad to share my alterations made or other problems with somebody who contacts me via this board. We could then exchange phone numbers for more direct communications.

Scottsville, NY

SPONSOR AD

Sponsor



Sponsor
 

User avatar
Barnyard
Team Cub
Team Cub
Posts: 24240
Joined: Tue Aug 07, 2007 3:39 pm
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety: Y
Location: OH, New Haven (Hamilton County)
Contact:

Re: New Member - Old Farmall Cub Enthusiast

Postby Barnyard » Sun Oct 11, 2009 11:46 am

Bud, Welcome to the Forum. You will find help with your problem as well as learn much more from these fine folks. Enjoy your stay.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.

Circle of Safety

User avatar
RaymondDurban
Cub Pro
Cub Pro
Posts: 4435
Joined: Wed Dec 26, 2007 7:45 pm
Zip Code: 32536
Circle of Safety: Y
Location: FL, Crestview

Re: New Member - Old Farmall Cub Enthusiast

Postby RaymondDurban » Sun Oct 11, 2009 2:39 pm

Welcome to the Forum Bud. Lots of great folks willing to share their knowledge.
Not sure if you have recieved your answer yet, but it sounds like the enigne is starving for fuel. Have you pulled the metering jet out to see if you have trash in it?
Let us know how things work out.

User avatar
John(videodoc)
10+ Years
10+ Years
Posts: 6547
Joined: Mon Jul 25, 2005 10:16 pm
Zip Code: 61944
Tractors Owned: -
55 F-Cub - snow plow and chains
3 Demonstrators Restored.
"Bette" - 22 mower
"Roxie" - 144 Complete Cults'
"Sandy"(Done) 193 Plow
1950 Demo, "Billie"
-(Woods 59")
Corn Stalk Cutter
23a Disc
&
2005 Mahindra w/FEL
Circle of Safety: Y
Location: IL, Paris just off of Interstate 70
Contact:

Re: New Member - Old Farmall Cub Enthusiast

Postby John(videodoc) » Sun Oct 11, 2009 8:24 pm

Welcome aboard

User avatar
Mike in Louisiana
10+ Years
10+ Years
Posts: 7811
Joined: Tue Feb 15, 2005 10:10 am
Zip Code: 71023
Circle of Safety: Y
Location: LA, Doyline

Re: New Member - Old Farmall Cub Enthusiast

Postby Mike in Louisiana » Mon Oct 12, 2009 8:15 am

Welcome to the forum Bud.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H

Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers

ellen
10+ Years
10+ Years

Re: New Member - Old Farmall Cub Enthusiast

Postby ellen » Mon Oct 12, 2009 7:20 pm

Welcome :{_}:

User avatar
Rudi
Cub Pro
Cub Pro
Posts: 28706
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada
Contact:

Re: New Member - Old Farmall Cub Enthusiast

Postby Rudi » Mon Oct 12, 2009 8:10 pm

Bud:

Welcome to the Cub Community :!:

Yup, definitely sounds like fuel starvation. Most likely this is a result of dirt/gunk/crud buildup probably originating in the tank and finding it's way to the jets. Please read the Cub Pointer Text below and follow it to the Welcome Wagon. There are a number of links there that will assist you in solving the fuel problem. Also, don't forget to check that the vent holes in the cap are clear of dirt and buildup as well ok? That can be a little thought of problem. There are a number of really good resources here including the CBoK and others, please do investigate them.

I have a feeling that you are describing the IH 3/4 Updraft Carb when you state: I still have the original carburetor and are talking about the Zenith when you state: International Cub carburetor .

Both of these carb diagrams can be found in the TC-37 Series Parts Catalogs and will help in identifying and cleaning the jets.

Hope this helps and again, Welcoem :!:

Image to Farmallcub.com :big smile: Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to :arrow: the Welcome Wagon wherein you will find links to many useful sites and topics. One of which is the Cub Manual Server. Enjoy!.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


User avatar
Bigdog
Team Cub Mentor
Team Cub Mentor
Posts: 24144
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville
Contact:

Re: New Member - Old Farmall Cub Enthusiast

Postby Bigdog » Mon Oct 12, 2009 8:58 pm

Welcome aboard Bud! I love Dixieland music!
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com

User avatar
beaconlight
10+ Years
10+ Years
Posts: 7703
Joined: Thu Aug 19, 2004 2:31 pm
Zip Code: 10314
Location: NY Staten Island & Franklin

Re: New Member - Old Farmall Cub Enthusiast

Postby beaconlight » Mon Oct 12, 2009 9:13 pm

Hey Bud I am near Oneonta. Couple of guys up your way. Take the main jet out the brass hex head in the carb bowl. Push a soft copper wire through it. Then blow it out with compressed air. This will cause the number one suspect. Generally if this is the case you can get it to run stronger with the choke partially or all the way out. Another possibility is the timing off or even valve adjustment. Plugged inlet at the tank, plugged screen in the sediment bowl as well as a plugged screen in the inlet for the carb if you still have one are suspect as well. Some have added filters into the fuel line that will not pass enough fuel at one time to run well under a heavy load. A misadjusted float in the carb can do it it as well.
I know this is a long list but start at the top and work through is till you fix your problem. This list is not all inclusive for a failing coil or condenser may cause your problem as well. This is not to say the coil or condenser has failed completely but sufficiently so as not able to handle a full load. This is rarer the the other possibilities.
Bill

"Life's tough.It's even tougher if you're stupid."
- John Wayne

" We hang petty thieves and appoint the great ones to public office."
- Aesop

User avatar
Trent M
Cub Pro
Cub Pro
Posts: 3337
Joined: Wed Aug 09, 2006 6:21 pm
Zip Code: 62859
Circle of Safety: Y
Location: Illinois Southern

Re: New Member - Old Farmall Cub Enthusiast

Postby Trent M » Tue Oct 13, 2009 8:29 am

Welcome aboard Bud! Looks like the guys have given good advice so far. I'm sure you'll get that Cub running great!!
Trent McPeak

User avatar
dgrapes59
10+ Years
10+ Years
Posts: 3726
Joined: Sun Jul 13, 2008 10:05 pm
Zip Code: 45067
Tractors Owned: 1951 Cub, 2-1955 Loboy w FH, a few plows, discs, mowers, blades, carrier & such
Several '61 CC Originals, Cub Cadet 100, several 102's & 122's, 124, various CC options & implements, #1Trailer, 1963 Springfield, JD 770, Ford 8N
Circle of Safety: Y
Location: OH, Trenton

Re: New Member - Old Farmall Cub Enthusiast

Postby dgrapes59 » Thu Oct 15, 2009 10:18 am

Bud,
Welcome to the forum! It sounds like you need to take special care of that Cub, it has been part of the family for many moons! Hopefully the advice given will remidy your issues!
Best of luck,
David

VinceD
10+ Years
10+ Years
Posts: 4587
Joined: Mon Apr 17, 2006 9:17 pm
Zip Code: 65626
Tractors Owned: 1949 Cub "Frodo"
1949 Cub "Sam" (future Project)
1965 Lo-Boy "Pippin"
1940 H "Walter"
1953 SC "Gimli"
Cub Cadet HDS 2155
Circle of Safety: Y
Location: MO, Bakersfield, (South - Central)

Re: New Member - Old Farmall Cub Enthusiast

Postby VinceD » Thu Oct 15, 2009 6:52 pm

Welcome, Bud. :D :D
Vince
High atop Hummingbird Hill
In the Missouri Ozarks
Image


Return to “Introduce Yourself”

Who is online

Users browsing this forum: No registered users and 6 guests