Hi from TN

Post your introduction and "get to know me" information in this forum.

Moderator: Team Cub

widespreadpanic
Posts: 3
Joined: Tue Apr 06, 2021 5:59 pm
Zip Code: 38501

Hi from TN

Postby widespreadpanic » Tue Apr 06, 2021 6:21 pm

Hi,

Uncle gifted me his 185 Lo boy, `75. Sat 10 years. Took a couple weeks tinkering but fired right up. Just having trouble with the mower, mule drive pulley bearing (exploded). Need to ID exactly which mower it is and if the left side adjustment mount is supposed to be 90 or bent out as it is right now ~ 110 degree... Look forward to learning and sharing.

Image
Image
Image
Image
Image
Image

User avatar
Mike in Louisiana
10+ Years
10+ Years
Posts: 7071
Joined: Tue Feb 15, 2005 10:10 am
Zip Code: 71023
Circle of Safety: Y
Location: LA, Doyline

Re: Hi from TN

Postby Mike in Louisiana » Wed Apr 07, 2021 7:48 am

Welcome to the forum.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H

Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers

User avatar
Stanton
Team Cub
Team Cub
Posts: 6779
Joined: Mon Jun 22, 2009 6:56 am
Zip Code: 64070
Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066
Circle of Safety: Y
Location: Lone Jack, MO

Re: Hi from TN

Postby Stanton » Wed Apr 07, 2021 1:13 pm

Welcome to the Forum!

Take some time and read through a few threads to acquaint yourself with the Forum:

Now that you’ve logged your 2nd post, you'll have access to the all the PDF Manuals on this site. There’s a few ways to do that:
  • From a desktop or laptop, go to "Quick Links" in the upper left corner of your screen. Hit that and a pull-down appears where you'll find "PDF Manuals".
  • You can also go to “Cub Info” in the upper toolbar, then hit “Rudi’s Manuals”. From there, you can access a variety of information.
  • If you're using a phone, go to the "Links Directory" (second category down the main page). Once in "Links Directory" , scroll down to the second section "Tractor Parts & Manuals" and you'll find them there.

Remember:
• When you have a specific question, start a new thread in the appropriate sub-forum.
• Before posting, use the Preview button before hitting Submit--it'll show you exactly what your post will look like, including pictures.
• When adding your comments to a thread, be sure to look at the date of the last poster. If it’s more than a 6 months old, the posters are probably not going to see it. Consider starting a new thread.

Glad you joined us.

:tractor:
Stanton
Image Circle of Safety


Return to “Introduce Yourself”

Who is online

Users browsing this forum: No registered users and 1 guest