How to keep those choke rods, starter rods etc. looking new!

Tips and tricks on repairs to your Cub’s structure.
troopfpc
10+ Years
10+ Years
Posts: 545
Joined: Thu Dec 25, 2008 2:44 pm
Zip Code: 07461
Tractors Owned: 1957 Cub, 1951 Cub, 198? JD 500C, 1954 Oliver OC3
Location: NJ, Sussex County

How to keep those choke rods, starter rods etc. looking new!

Postby troopfpc » Sat Jun 27, 2009 6:18 pm

pic01.jpg

Hey Folks!! Billy Maze here (name changed to protect the innocent (me)) with another new product. Forget the "Kaboom", "Super Putty" or "Hercules Hooks", we know offer the amazing new "Waller Wonder". This is not your ordinary shrink tubing that you can get at Radio Shack :wink:. This is our own special material :wink:.

Are you tired of metal on metal rubbing in vital areas and causing the unsightly "Wallered " out holes. Have you or are you restoring a tractor and don't want paint on paint rubbing?
pic02.jpg


Does your dash now look like this and you want that patched up hole to stay round?

pic03.jpg


Here is the amazing "Waller Wonder" in clear and red. We will use the clear on this Cub!
pic04.jpg


Cut your pieces to the desired size
pic05.jpg

"Waller Wonder" can be tough to slide around corners so wet it and apply a little liquid soap. Then make darn sure to remove the soap and any moisture before securing it in place. Here are the 3 locations where we will use "Waller Wonder" on a throttle rod.
pic06.jpg

pic07.jpg


Now go and fetch your favorite heat gun and put it to work on "Waller Wonder"
pic08.jpg

Now look at "Waller Wonder". You can barely tell it is there but it will protect against that horrible rubbing (at least until it wears out and needs replacing :wink: )
pic09.jpg

pic10.jpg

pic11.jpg

Smaller versions of "Waller Wonder" even work in other places like this!!!
pic12.jpg


Ofcourse this product will be great on starter and choke rods as well!! So folks, don't forget to order your "Waller Wonder", do it today and we will double the quantity absolutely free (just pay ridiculous shipping and handling).
Last edited by Barnyard on Tue Apr 10, 2018 12:01 am, edited 1 time in total.
Reason: Added Missing Images
I know a little about everything and alot about nothing....

  • Similar Topics
    Replies
    Views
    Last post
  • Tie rods Attachment(s)
    by Jeff Silvey » Sat Feb 06, 2021 8:42 am » in Farmall Cub
    3
    282
    by Jeff Silvey
    Mon Feb 08, 2021 8:04 am
  • inner tie rods Attachment(s)
    by hotrodcars » Thu May 20, 2021 7:20 pm » in Farmall Cub
    5
    272
    by Glen
    Fri May 21, 2021 7:20 pm
  • Brake rods Attachment(s)
    by tomstractor » Fri Dec 13, 2019 2:27 pm » in Farmall Cub
    13
    746
    by Scrivet
    Fri Dec 20, 2019 11:25 pm
  • brake rods Attachment(s)
    by 5 Forward » Mon Feb 21, 2022 8:47 pm » in Farmall Cub
    7
    330
    by 5 Forward
    Thu Feb 24, 2022 5:10 pm
  • Main and rods Grease , Oil, Other
    by Command52 » Sat Dec 14, 2019 12:56 pm » in Farmall Cub
    9
    378
    by BigBill
    Sun Dec 15, 2019 5:16 pm

Return to “Frame/Sheet Metal”

Who is online

Users browsing this forum: No registered users and 0 guests