This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Wick for generator
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 244
- Joined: Fri Nov 24, 2017 7:40 pm
- Zip Code: 19954
Wick for generator
Im working on my generator (1101355 3 brush) , I got in the brushes bushing and sealed bearing today, Does anyone know a part number for the wick and can I find it at a napa type store. Also am I correct by drilling a 1/4in hole in the bushing for the wick, I wand to try to wrap this generator up this weekend Thank You
- Glen
- 10+ Years
- Posts: 6095
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Re: Wick for generator
Hi,
Below is a page from the Cub parts manual showing the wick part number. It is listed at the parts included with number 8 in the pic, it is the last part in that group. That is the Delco part number, I think.
That is the newer parts manual, they no longer show the part number of the generator with the cutout, or Relay, IH called it. You could look online for the part number of the wick. I'm not sure if it is the same as a 1101355 generator had, but it might be.
http://www.farmallcub.info/manuals/cub_ ... 008-05.jpg
Below is a page from the Cub parts manual showing the wick part number. It is listed at the parts included with number 8 in the pic, it is the last part in that group. That is the Delco part number, I think.
That is the newer parts manual, they no longer show the part number of the generator with the cutout, or Relay, IH called it. You could look online for the part number of the wick. I'm not sure if it is the same as a 1101355 generator had, but it might be.
http://www.farmallcub.info/manuals/cub_ ... 008-05.jpg
-
- 10+ Years
- Posts: 272
- Joined: Fri Apr 03, 2009 11:37 pm
- Zip Code: 00000
Re: Wick for generator
PM me your address and I will mail you
a 1/4 felt wick.
a 1/4 felt wick.
Who is online
Users browsing this forum: jbevard and 33 guests