This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cub timing question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
ShawnAgne
- 5+ Years
- Posts: 846
- Joined: Sat May 07, 2016 5:13 pm
- Zip Code: 45380
- Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
1955 Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
1955 Farmall 100 (Thomas)
12V with Petronix
Woods L59 60"
A60 Leveling Blade
Front/Rear Weights - Circle of Safety: Y
- Location: Versailles, Ohio
Cub timing question
When running a 184 motor what rpm should be ran when timing at the 16 degree mark?
Shawn Agne
-
Jim Becker
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Cub timing question
Anything from about 1600 on up.
-
Eugene
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Cub timing question
Plus or minus a tad, 1600 rpms and the advance will max out at 16 degrees. The advance remains at 16 degrees when engine rpms are above 1600.
I wouldn't get excited about the exact point at which the distributor advance reaches 16 degrees.
Magneto advance, 13 degrees, begins when the impulse coupling drops out, somewhere just above 250 rpms. Once the magneto's impulse coupling drops out - that it - 13 degrees at all engine rpms.
I wouldn't get excited about the exact point at which the distributor advance reaches 16 degrees.
Magneto advance, 13 degrees, begins when the impulse coupling drops out, somewhere just above 250 rpms. Once the magneto's impulse coupling drops out - that it - 13 degrees at all engine rpms.
I have an excuse. CRS.
Who is online
Users browsing this forum: No registered users and 57 guests
