This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
1st/reverse shifter fork bolt not lining up
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
dblact38
- 5+ Years
- Posts: 23
- Joined: Mon Oct 20, 2014 6:41 pm
- Zip Code: 13755
- Location: Downsville, New York
1st/reverse shifter fork bolt not lining up
I finally got a chance to replace my shifter fork, but I have one problem, after I installed the fork on the rod the bolt does not line up with the threaded hole on the fork it misses by a hair. Can I ream out the top hole alittle to make it work ? Has this happened to anyone? Any help will be appreciate Thanks
-
Bob McCarty
- Team Cub
- Posts: 11858
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: 1st/reverse shifter fork bolt not lining up
You may just need to rotate the rod a little so the groove in the rod lines up better with the top and bottom holes on the fork.
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
Who is online
Users browsing this forum: No registered users and 67 guests
