Another gas filter idea

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
rexxon
5+ Years
5+ Years
Posts: 338
Joined: Wed Mar 16, 2011 3:31 am
Zip Code: 21853
Circle of Safety: Y

Another gas filter idea

Postby rexxon » Fri Aug 04, 2017 7:26 pm

Here is one I am going to try, the only place I could find 1/2-20 x 1/8 npt was Speedway Motors number on part is 910-3184 and the filter is an AC GF 434
I think it should make a nice rigid set up more photos to follow if installation is successful
Attachments
Webp.net-resizeimage.jpg

staninlowerAL
5+ Years
5+ Years
Posts: 3380
Joined: Fri Oct 29, 2010 11:34 pm
Zip Code: 36558
Tractors Owned: Cubs: (3)'49's, (1)'52, (1)'57 IH Cub LoBoy w/FH, (1)'72 154 Number Series Loboy, '76 Longstripe w/FH, Mowers: C-22, Bush Hog 412, Pennington 59, Woods RM42CF, Woods 42, assorted FCub plows, planters, discs, etc. OTHERS: '49 AC B & Ind. Sickle mower, '61 AC D12 Ser 2, '52 8N, '56 Ferguson 35 Deluxe, '53 MM BG (offset), (2) '49 Avery V's, '51 JD M (regular), '56 JD 420C, with Blade and fire plow, '85 JD 850 (Yanmar) w/72" belly mower, '76 Yanmar 1500, Sears Surburban's, MTD's, Jeeps & other misc. "treasures"
Circle of Safety: Y
Location: AL (Southwest)

Re: Another gas filter idea

Postby staninlowerAL » Fri Aug 04, 2017 9:03 pm

You can easily make the adapter using a std 5/16 brake line fitting (1/2 x 20) and run a 1/8 npt tap in it. I've used this same filter setup before and so far, no problems. Downside is the flex hose fitting on the inlet side.

CharlieK
10+ Years
10+ Years
Posts: 366
Joined: Sun Apr 10, 2005 9:25 pm
Location: bullitt county, kentucky

Re: Another gas filter idea

Postby CharlieK » Sat Aug 05, 2017 9:51 pm

should work well
get er done; life is good


  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: Garvin Gatewood, tst and 6 guests