International Cub Loboy part

[chuck ma]

I have this 1-1/2 square tube 1/4 wall thickness 12inckes long with half inch hole drilled on both sides one hole is on center at one inch from the end the other 1-1/4 on center from end. This came with my Loboy in the 1-1/2 mounting hole. I've never had a rotary mower on it so I don't know if thats what it's for or for something else. Anyway I was about to cut it down and use a piece for another project, but remembering that it was with the cub, I wasn't sure if I should cut before asking about it. I know its just tubing holes but maybe somebody wanted all original cub parts (if that's what is). I'm going to post a pic Or try to lol

[John *.?-!.* cub owner]

If it was in the cultivator mounting hole on the front bolster, someone may have been using it to put clevis on or eye bolts as a front tie down. I do not think it is anything original to the cub though.

[chuck ma]

Hey John thanks for the reply. I wasn't sure what it was for, I do know that Cub Lowboy came from a local golf course where it was used as a mower for many years. It had two other owners before it came to me. All in all the Cub has been within 4 miles or less of its original home. thanks Chuck