Everyone,
The last couple times I have plowed the garden with my Cub, I have noticed issues with it pushing the rear sweeps into the ground. If I pull the TC lever down to the usual spot, the engine will labor like the hydraulics are under pressure, but it can't push the sweeps any deeper. If I add some weight to each side (cinder blocks) it will go into the ground better. It lifts fine but right now all that's on it are the 144 cultivators.
Where do I need to start looking first? I'm thinking a relieve valve is weak, but it's been a while since I've read the manual on this.
thanks,
Al
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Touch Control lack of down pressure
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Super A
- 10+ Years
- Posts: 5234
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
Touch Control lack of down pressure
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022