I am working on restoring my Depth Lever for my Cub 193 Moldboard Plow and noticed that the 516910R91 Quadrant Support (Picture Below) has a Bow/Bend in it and was wondering if that is correct or should it be Flat?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cub 193 Depth Lever Quadrant Support
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- PoconoCub
- 5+ Years
- Posts: 391
- Joined: Thu Sep 04, 2014 3:55 pm
- Zip Code: 18330
- Tractors Owned: .
1957 Farmall Cub
1953 Farmall Cub
1949 Farmall Cub
1948 Farmall Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: Effort, PA
- Contact:
- Urbish
- 10+ Years
- Posts: 2428
- Joined: Sat Sep 07, 2013 3:45 pm
- Zip Code: 48158
- Tractors Owned: ~
1958 International Cub LoBoy
1947 Farmall H
1946 Farmall B
1953 Willys CJ3B
2022 Massey Ferguson GC1723E Subcompact
Cub Loboy L-54 Leveling and Grader Blade - Circle of Safety: Y
- Location: Manchester, MI
Re: Cub 193 Depth Lever Quadrant Support
Mine is laser straight. Looks like that one has been tweaked.
Jim
- PoconoCub
- 5+ Years
- Posts: 391
- Joined: Thu Sep 04, 2014 3:55 pm
- Zip Code: 18330
- Tractors Owned: .
1957 Farmall Cub
1953 Farmall Cub
1949 Farmall Cub
1948 Farmall Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: Effort, PA
- Contact:
Re: Cub 193 Depth Lever Quadrant Support
Urbish wrote:Mine is laser straight. Looks like that one has been tweaked.
That is what I thought, time to take out the 500,000 btu torch and make it straight.
Scott
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Cub 193 Depth Lever Quadrant Support
I had one that looked just about like that. A hydraulic press made quick work of readjusting it.
- PoconoCub
- 5+ Years
- Posts: 391
- Joined: Thu Sep 04, 2014 3:55 pm
- Zip Code: 18330
- Tractors Owned: .
1957 Farmall Cub
1953 Farmall Cub
1949 Farmall Cub
1948 Farmall Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: Effort, PA
- Contact:
Re: Cub 193 Depth Lever Quadrant Support
Jim Becker wrote:I had one that looked just about like that. A hydraulic press made quick work of readjusting it.
I wish I had a hydraulic press it would make things a lot easier, but in a pinch the 500,000 btu torch comes in handy. Now if the weather would just cooperate so I can work outside.
Scott
Who is online
Users browsing this forum: No registered users and 60 guests