This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Fan Pulley
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
gjpgonzo
- 5+ Years
- Posts: 77
- Joined: Tue Nov 22, 2016 2:38 pm
- Zip Code: 01906
- Tractors Owned: 1958 McCormic Farmall Cub
Fan Pulley
Is there an easy way to remove the fan pulley assembly?
-
staninlowerAL
- 10+ Years
- Posts: 4991
- Joined: Fri Oct 29, 2010 11:34 pm
- Zip Code: 36558
- Tractors Owned: Cubs: (3)'49's, (1 is for parts), (1)'57 IH Cub LoBoy w/FH, (2)154 Number Series Loboys, (1 is for parts), '76 Longstripe w/FH, Mowers: C-22, Bush Hog 412, Pennington 59, Woods RM42CF, Woods 42, assorted FCub plows, planters, discs, etc. OTHERS: '49 AC B & Ind. Sickle mower, '61 AC D12 Ser 2, '52 8N, '56 Ferguson 35 Deluxe, '47 & '49 Avery V, '53 MM BG (offset), '51 JD M (regular), '56 JD 420C, with Blade and fire plow, '85 JD 850 (Yanmar) w/72" belly mower, '76? Yanmar 2TR15 1500 & Bush Hog SQ42S-2 mower, '78? FORD Dexta, '86 FORD LGT14D & 48" Mower, (2)Cub Cadets & Mowers (MTD), (4) Sears Surburban's, other MTD mowers, Jeeps & other misc. "treasures"
- Circle of Safety: Y
- Location: AL (Southwest)
Re: Fan Pulley
Your pictures look like you already have the blades off. Hold the nut that's between the forked piece and turn the fan shaft with a thin open end wrench. The forked piece is cast and made on to the engine front cover so you don't want to break it. That would require replacing the front cover.
Stan in LA (lower AL)
USAF & Reserves, Reg ARMY, ARMY NG (AL)
USAF & Reserves, Reg ARMY, ARMY NG (AL)
-
Urbish
- 10+ Years
- Posts: 2428
- Joined: Sat Sep 07, 2013 3:45 pm
- Zip Code: 48158
- Tractors Owned: ~
1958 International Cub LoBoy
1947 Farmall H
1946 Farmall B
1953 Willys CJ3B
2022 Massey Ferguson GC1723E Subcompact
Cub Loboy L-54 Leveling and Grader Blade - Circle of Safety: Y
- Location: Manchester, MI
Re: Fan Pulley
You may have to grind a cheap wrench thinner to make it fit if you don't already have a thin one.
Jim
-
gjpgonzo
- 5+ Years
- Posts: 77
- Joined: Tue Nov 22, 2016 2:38 pm
- Zip Code: 01906
- Tractors Owned: 1958 McCormic Farmall Cub
Re: Fan Pulley
Just so I completely understand. Hold the nut in the fork piece (so the fork doesn't snap off) and turn the pulley by the nut that is in front of the pulley?
-
Dale Finch
- 10+ Years
- Posts: 6682
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Fan Pulley
The wrench size is 13/16". As they said, go buy an extra one and grind it thinner.
To clarify, you want to turn the SHAFT (it has flats for the wrench) in FRONT of the forked mounting point. I usually also put a wrench on that rear nut, but ONLY to hold it in place and not let it turn and possible break the casting (engine front cover) holding it.
Once the fan drops down, you can remove the belts and slide the fan assembly up and out.
Note: my thumbs are too slow!!
To clarify, you want to turn the SHAFT (it has flats for the wrench) in FRONT of the forked mounting point. I usually also put a wrench on that rear nut, but ONLY to hold it in place and not let it turn and possible break the casting (engine front cover) holding it.
Once the fan drops down, you can remove the belts and slide the fan assembly up and out.
Note: my thumbs are too slow!!
Dale Finch
-
Barnyard
- Team Cub
- Posts: 24271
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: Fan Pulley
Go to 2:25 in this video.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
ajhbike
- 5+ Years
- Posts: 1623
- Joined: Thu Mar 09, 2017 4:06 pm
- Zip Code: 06405
- Tractors Owned: 1957 Cub
1951 Super C
1966 IH 504 Hi-Clear
1968 JD 3020
1949 JD B
1949 Ford 8N
1955 Ferguson TO-35 - Location: Branford, CT
Re: Fan Pulley
Can you get the 2 belts at NAPA? Might as well replace both while open.
-
staninlowerAL
- 10+ Years
- Posts: 4991
- Joined: Fri Oct 29, 2010 11:34 pm
- Zip Code: 36558
- Tractors Owned: Cubs: (3)'49's, (1 is for parts), (1)'57 IH Cub LoBoy w/FH, (2)154 Number Series Loboys, (1 is for parts), '76 Longstripe w/FH, Mowers: C-22, Bush Hog 412, Pennington 59, Woods RM42CF, Woods 42, assorted FCub plows, planters, discs, etc. OTHERS: '49 AC B & Ind. Sickle mower, '61 AC D12 Ser 2, '52 8N, '56 Ferguson 35 Deluxe, '47 & '49 Avery V, '53 MM BG (offset), '51 JD M (regular), '56 JD 420C, with Blade and fire plow, '85 JD 850 (Yanmar) w/72" belly mower, '76? Yanmar 2TR15 1500 & Bush Hog SQ42S-2 mower, '78? FORD Dexta, '86 FORD LGT14D & 48" Mower, (2)Cub Cadets & Mowers (MTD), (4) Sears Surburban's, other MTD mowers, Jeeps & other misc. "treasures"
- Circle of Safety: Y
- Location: AL (Southwest)
Re: Fan Pulley
Should be available. I've purchased the belts at auto parts before. Take your old belts or part numbers.
Stan in LA (lower AL)
USAF & Reserves, Reg ARMY, ARMY NG (AL)
USAF & Reserves, Reg ARMY, ARMY NG (AL)
-
Don McCombs
- Team Cub Mentor
- Posts: 17486
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Fan Pulley
Gen - NBH 4L220W
Fan - NBH 2524308
Fan - NBH 2524308
Don McCombs
MD, Deep Creek Lake
Proud Member of Maryland Chapter 39
The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor
MD, Deep Creek Lake
Proud Member of Maryland Chapter 39
The best teachers are those who show you where to look, but don't tell you what to see.
A. K. Trenfor
-
ajhbike
- 5+ Years
- Posts: 1623
- Joined: Thu Mar 09, 2017 4:06 pm
- Zip Code: 06405
- Tractors Owned: 1957 Cub
1951 Super C
1966 IH 504 Hi-Clear
1968 JD 3020
1949 JD B
1949 Ford 8N
1955 Ferguson TO-35 - Location: Branford, CT
Re: Fan Pulley
Commented on the wrong thread...the video was great. I changed both my belts in about 10 minutes. Thanks, BY
Who is online
Users browsing this forum: No registered users and 55 guests
