hydraulics not working

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
sburre
Posts: 4
Joined: Tue Apr 18, 2017 7:41 am
Zip Code: 22534

hydraulics not working

Postby sburre » Tue Apr 18, 2017 7:46 am

I have rebuild the hydraulic pump and the touch control on a cub ser: 47095 251341r1 and the hydraulics will not lift. If I help pull them up they will stay in the up position. Any suggestions as to what the problem might be?

User avatar
PoconoCub
Cub Star!!
Cub Star!!
Posts: 345
Joined: Thu Sep 04, 2014 3:55 pm
Zip Code: 18330
Tractors Owned: .
1957 Farmall Cub
1953 Farmall Cub
1949 Farmall Cub
1948 Farmall Cub
Circle of Safety: Y
Location: Effort, PA

Re: hydraulics not working

Postby PoconoCub » Tue Apr 18, 2017 4:27 pm

Did you check the hydraulic oil level? Since you completely emptied both the TC and the pump you have to check it once the system is pumping to fill the voids and get the air out.
Scott
ImageCircle of Safety

User avatar
Glen
5+ Years
5+ Years
Posts: 2702
Joined: Mon Mar 19, 2012 7:33 pm
Zip Code: 00000
Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
Circle of Safety: Y
Location: Wa.

Re: hydraulics not working

Postby Glen » Tue Apr 18, 2017 5:25 pm

Hi,
The system uses Case IH Hy-Tran fluid, it is thin fluid. There are other brands, be sure it works with IH systems before buying it.
When you first fill it after being apart, fill it up to the filler hole.
The air has to be removed from the system so it will work.
Here is a page from a Cub owner's manual telling how to fill the Touch Control and remove the air from the system. Be sure to do what it says in paragraph 4.
If you have run it lots, and air is mixed into the fluid, it might be good to drain the system and start over filling it, it only holds about 3 1/2 pints. The drain plug is on the right side, like in the pic below.
The number you posted above, 251341R1 is the block part number. The engine serial number is above the engine oil filler, stamped in the block. :)

http://farmallcub.com/rudi_cub/www.clea ... age-67.jpg


  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: Clownfish, mcwinter and 5 guests