Hey all,
I took the back strap off the generator on my cub, and the gasket material broke in 2 pieces. I am trying to replace it, but can't find it onlinen and also can't find what kind of material to use to replace it. Can anyone tell me what is used there?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
delco generator
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Mike in Louisiana
- 10+ Years
- Posts: 7827
- Joined: Tue Feb 15, 2005 10:10 am
- Zip Code: 71023
- Circle of Safety: Y
- Location: LA, Doyline
Re: delco generator
Any auto electric shop that rebuilds starters/generators should have it. All it is there for is to keep the dust and dirt out. Some gasket material should work, if its the part i am thinking about.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
-
- 10+ Years
- Posts: 5206
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: delco generator
you can just tape it, nothing fancy, just a dust seal
-
- 5+ Years
- Posts: 5
- Joined: Sun Aug 07, 2016 10:00 am
- Zip Code: 43357
Re: delco generator
Ok, I just wasn't sure exactly what it was for, but that makes sense. Thank you!!