193 bits and bobs

[eiebe]

Ok now that I've had some time to relax from my trip to JP I decided to tear down my new plow and repaint repair and look over the plow, In my excitement I didn't see the crack and welding of the moldboard now I know their were an absolute ton of shares made for the 193 but haven't seen a list of what would work with what soil I'm on my phone but I'll see if I can post some pictures so any one willing to chime in with what I have I would deeply appreciate it

[eiebe]

Ok so I can't resize while on mobile so I'll post some links to the pictures
Moldboard https://goo.gl/photos/Bu8uukCJN1L6e4jH6
And weld https://goo.gl/photos/j1B6a3zLKRDK8KsU8
The share https://goo.gl/photos/YTpwmGg5TbbmPkvW9
My landslide https://goo.gl/photos/yZHH2hC1yPWDwfPP8

Larger pic https://goo.gl/photos/teAcCXJHDaNjmJZE6

And one follow up question on the end of my moldboard is a length of steel I've seen photos with and without it what is it's purpose?

[Glen]

Hi,
Here is the 193 plow owner's manual, if you don't have it.

http://farmallcub.com/rudi_cub/www.clea ... index.html

If you mean the curved piece of metal at the rear of the moldboard, I think that is an option, and I think it helps the plow to roll over the soil better than just the moldboard would do.