This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
touch control problem
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1654
- Joined: Thu Dec 24, 2009 9:19 am
- Zip Code: 00000
- Tractors Owned: '48 trimmed dash high crop cub , '78 3/4 cub , lo-boy/59 mower , '64 "galvanized" cub , cub-6 toolbar , sicklebar mowers , 54 blade , plow , mott mower , early belly mower . . international 1010 pickup with 345ci v-8 .
- Circle of Safety: Y
- Location: louisiana
touch control problem
good morning all from the humid deep south . 75 degrees at 6:00 am , high in the 80's today and yesterday, 80% humidity . why are yooous yankees keeping all the cool weather up there ? my touch control works great ,strong , for about 15-20 minutes . then it just gets slower and slower till it will not even raise up anything attached . it presently has a cub-6 tool bar and row builders . should i suspect the t/c , or the pump first . or could it be either one equally ? thanks guys and dale , see y'all soon . coppersmythe..............................................( 64' cub with original t/c )
-
- 10+ Years
- Posts: 5212
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: touch control problem
put a gauge on it and see what the pressure is cold and what it reads after it gets hot, if the pressure goes away its the pump
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: touch control problem
MY guess would be the limit stops on the bottom left of the TC unit or out of adjustment, and when it is all the way up or down the pump is still running against pressure and causing it to heat up.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
Who is online
Users browsing this forum: No registered users and 63 guests