This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Another Fast Hitch Question (Hopefully My Last!)
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
EugeneFromMichigan
- 5+ Years
- Posts: 28
- Joined: Sun Sep 20, 2015 6:36 pm
- Zip Code: 48357
Another Fast Hitch Question (Hopefully My Last!)
In reassembling my fast hitch I noticed for the first time that the three holes in the big round bar at the bottom (the one the pull bar can slide along left/right) are not symmetrical. The hole on one side is roughly 5 inches from the turned end, while the other is roughly 6 inches. Could someone confirm which end goes to the left (when looking from the rear) and which goes to the right? Thanks much!
-
Slim140
- 5+ Years
- Posts: 4908
- Joined: Wed Nov 22, 2017 6:24 am
- Zip Code: 00000
- Tractors Owned: .
1970 International 140
1972 International 140
1949 John Deere A
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original - Circle of Safety: Y
Re: Another Fast Hitch Question (Hopefully My Last!)
Pretty sure the 6" is on the left if your standing behind it.
Every home is a school, what are you teaching?
-
Jim Becker
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Another Fast Hitch Question (Hopefully My Last!)
To state it another way, one hole should be centered and the other two towards the right side of the tractor.
Who is online
Users browsing this forum: Majestic-12 [Bot] and 52 guests
