This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
What bolts to use when putting engine on a stand
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- ShawnAgne
- 5+ Years
- Posts: 838
- Joined: Sat May 07, 2016 5:13 pm
- Zip Code: 45380
- Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
1955 Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
1955 Farmall 100 (Thomas)
12V with Petronix
Woods L59 60"
A60 Leveling Blade
Front/Rear Weights - Circle of Safety: Y
- Location: Versailles, Ohio
What bolts to use when putting engine on a stand
Have a newly rebuilt 184 motor that I need to paint up before I put it in the 52 FCub. Was just wondering what type of bolts I should use when bolting into the engine stand. Also the stand I'm being loaned is rated at 250lb. Is that adequate enough for the motor?
Shawn Agne
-
- Team Cub Mentor
- Posts: 20336
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: What bolts to use when putting engine on a stand
The long block, complete engine weighs around 150 lbs.
Bolts, depends on how you mount the engine to the engine stand. Your choice.
Bolts, depends on how you mount the engine to the engine stand. Your choice.
I have an excuse. CRS.
- Stanton
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Re: What bolts to use when putting engine on a stand
I would think safety first and use grade 8 bolts, available at most hardware stores.
Who is online
Users browsing this forum: No registered users and 21 guests