54a grader

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Roadkill101
Posts: 9
Joined: Mon Sep 12, 2016 8:41 am
Zip Code: 14040

54a grader

Postby Roadkill101 » Tue Sep 13, 2016 2:50 pm

New to the forum and looking for part number 651267r92 for my farmall cub or if I could have the dimensions on how long the rod assembly rear bar is I'm sure I could make a replacement. I know that the diameter of the bar is 5/8 inches. Thank you all for any help.

Bob McCarty
Team Cub
Team Cub
Posts: 8680
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: 54a grader

Postby Bob McCarty » Tue Sep 13, 2016 6:06 pm

That part # is for a lift arm that is 1/2 x 2" stock. To make sure we're talking about the right part, here's a link to TM Tractor that shows the pieces on a pallet: http://www.tmtractor.com/tm-tractor/gim ... et_001.htm . The part # you refer to is in the lower right just above the boomerang (U shaped piece). If that's what you need, I can get you measurements, just made a few.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

User avatar
Urbish
501 Club
501 Club
Posts: 1345
Joined: Sat Sep 07, 2013 3:45 pm
Zip Code: 48158
Tractors Owned: ~
1948 Farmall Cub
1947 Farmall H
1946 Farmall B
1953 Willys CJ3B
Circle of Safety: Y
Location: Manchester, MI

Re: 54a grader

Postby Urbish » Tue Sep 13, 2016 7:35 pm

Bummer, Rudi has an accurate CAD drawing of that part on his site. Too bad his site is still down.

Roadkill101
Posts: 9
Joined: Mon Sep 12, 2016 8:41 am
Zip Code: 14040

Re: 54a grader

Postby Roadkill101 » Wed Sep 14, 2016 12:04 pm

Looked at the manuals in this forum and found the exact that blade that I have a 1949 cub leveling and grading blade and the 2 part numbers that I need are 650 293 r91 rod lifting rear and 650 290 r93 extension bell crank.

Roadkill101
Posts: 9
Joined: Mon Sep 12, 2016 8:41 am
Zip Code: 14040

Re: 54a grader

Postby Roadkill101 » Wed Sep 14, 2016 12:34 pm

Just wanted to know if anyone knows how much clearance that the blade will achieve off the ground on a 1949 grader and leveling blade. Thanks for any help in advance.


  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: Bezirk, Dale Finch, FLOPGUY, Glen, Ole90633 and 4 guests