This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Crankshaft Pulley Puller

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
User avatar
AL Farmall Boy
10+ Years
10+ Years
Posts: 2555
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35630
Circle of Safety: Y

Crankshaft Pulley Puller

Postby AL Farmall Boy » Wed Aug 24, 2016 11:39 am

I am looking for a crankshaft pulley puller like many of you use here on the site. I am wanting to use it on cub engines and the super A and 140 engines too. Having said that I would like a puller that will fit either one. Does anyone out there know of a polar I can purchase for this or does anyone out there make them and sell them ? I've had plans for a while to make my own but Time just does not allow and it has come down to the point to where I need one now.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
:tractor: Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! :tractor:
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
User avatar
Slim140
5+ Years
5+ Years
Posts: 4908
Joined: Wed Nov 22, 2017 6:24 am
Zip Code: 00000
Tractors Owned: .
1970 International 140
1972 International 140
1949 John Deere A
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original
Circle of Safety: Y

Re: Crankshaft Pulley Puller

Postby Slim140 » Wed Aug 24, 2016 11:55 am

I was just needing one as well and time was limited. I found this nice one someone made viewtopic.php?f=11&t=34545 and took a torch and made my own. Used threaded rod for my rods and a bottle jack. Material is 5" channel iron. Worked great and just removed my Cub pulley without damage. Pay not attention to the 2 offset drilled holes, they were already in the metal.
Attachments
IMG_9078.JPG
IMG_9079.JPG
Every home is a school, what are you teaching?

Circle of Safety
Top
User avatar
AL Farmall Boy
10+ Years
10+ Years
Posts: 2555
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35630
Circle of Safety: Y

Re: Crankshaft Pulley Puller

Postby AL Farmall Boy » Wed Aug 24, 2016 1:11 pm

Chipmaker wrote:I was just needing one as well and time was limited. I found this nice one someone made viewtopic.php?f=11&t=34545 and took a torch and made my own. Used threaded rod for my rods and a bottle jack. Material is 5" channel iron. Worked great and just removed my Cub pulley without damage. Pay not attention to the 2 offset drilled holes, they were already in the metal.


That would have been Ralph in Kentucky. He used to salvage Cubs and has since retired. I'm not sure how to get in touch with the guy who made that puller but I am after something very similar that will work on all 3 tractors
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
:tractor: Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! :tractor:
Top
ScottyD'sdad
Cub Pro
Cub Pro
Posts: 7506
Joined: Thu Aug 31, 2006 7:00 pm
Zip Code: 02769
Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator
Circle of Safety: Y
Location: Ma. Rehoboth

Re: Crankshaft Pulley Puller

Postby ScottyD'sdad » Wed Aug 24, 2016 2:14 pm

Earle Fauble, a forum member, was making them. Don't know if he still does. Forum name, "Earle", i think..

Ed
Image
Member of Chapter 18, and National
Circle of Safety
Top
Bob McCarty
Team Cub
Team Cub
Posts: 11850
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Crankshaft Pulley Puller

Postby Bob McCarty » Wed Aug 24, 2016 3:58 pm

You might want to measure the diameter of the back of the pulleys and see how much difference there is. If the slot is too wide, you risk breaking the sides of the Cub pulley. I talked to Earl at the Tug and don't think he's making the pullers anymore. You might PM Farmertan and see if he is.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
Top
User avatar
AL Farmall Boy
10+ Years
10+ Years
Posts: 2555
Joined: Tue Aug 10, 2010 6:38 pm
Zip Code: 35630
Circle of Safety: Y

Re: Crankshaft Pulley Puller

Postby AL Farmall Boy » Wed Aug 31, 2016 1:37 pm

FarmerTan isn't making them either. I need to get the sizes of the 2 pulleys. Thanks for the help.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
:tractor: Follow my page "Alabama Tractor Pickers" on YouTube & Facebook! :tractor:
Top
User avatar
schmibm
10+ Years
10+ Years
Posts: 691
Joined: Tue Jun 06, 2006 10:37 pm
Location: Janesville, IA

Re: Crankshaft Pulley Puller

Postby schmibm » Wed Aug 31, 2016 10:11 pm

May want to check out this post on here from a couple years back.

http://www.farmallcub.com/phpBB2/viewto ... =1&t=85101
1949 Project Cub
1955 Cub Lo-Boy "Jack"
1957 Cub Lo-Boy "Mac"
1957 Cub with 5' Woods Belly Mower "James"
24 other Farmalls A thru SMTA.
Top
Bob McCarty
Team Cub
Team Cub
Posts: 11850
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Crankshaft Pulley Puller

Postby Bob McCarty » Wed Aug 31, 2016 10:24 pm

Here's a link for plan "B" for pulley removal: viewtopic.php?f=141&t=44517

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
Top
Post Reply

Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 21 guests