I cant get to any of the links for the pitman board dimensions...my (now broken) board had the hole for the spring deep enough that the spring was bottoming out against the first bolt. Is that correct or is that too deep ?
That is the only dimension I need for now, but if anyone knows a place to view all the dimensions I would like to take a peek.
thanks-Tim
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
pitman board spring hole
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 441
- Joined: Sat Jul 12, 2014 10:10 pm
- Zip Code: 53105
- Tractors Owned: '57 cub Loboy
'61 cub - Circle of Safety: Y
- Location: Wisconsin, Burlington
-
- Team Cub
- Posts: 11817
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: pitman board spring hole
I measured an OEM and the hole was 1 1/2" deep. That leaves about 1/4" of wood between the spring and bolt hole.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- 5+ Years
- Posts: 441
- Joined: Sat Jul 12, 2014 10:10 pm
- Zip Code: 53105
- Tractors Owned: '57 cub Loboy
'61 cub - Circle of Safety: Y
- Location: Wisconsin, Burlington
Re: pitman board spring hole
Once again, thanks Bob.
Who is online
Users browsing this forum: No registered users and 29 guests