This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
oil regulating valve
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
housebg
- 5+ Years
- Posts: 141
- Joined: Wed Apr 29, 2015 5:23 am
- Zip Code: 70785
- Tractors Owned: 1950AV Farm all High clearance
1952 Farm all Cub
1958 Farm all Cub
1959 Farm all Cub Lowboy
1951 Farm all Super A
1942Farm all B
1944Farmall B
2000Yanmar YM 2000
Gravely 5665
David Brown 880 - Location: Walker Louisiana
oil regulating valve
this was removed and the hole may be rusty and idea how to clean up .It should move freely right. This motor was in pieces in a box when I started so Lots questions
-
Eugene
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: oil regulating valve
1st thought. Strip the block of all parts and have it boil out. If there is rust or debris in the opening, attempts to remove it will put some of the debris into the oil gallery leading to the oil filter or oil pan.
2nd thought. Oil based solvent and lint free rag. Soak rag with solvent. Wipe down the opening.
2nd thought. Oil based solvent and lint free rag. Soak rag with solvent. Wipe down the opening.
I have an excuse. CRS.
Who is online
Users browsing this forum: Garvin Gatewood, Glen and 91 guests
