This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Bolts
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Dan England
- Cub Pro
- Posts: 3094
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: 71770
- Location: AR, Waldo
Bolts
The TM picture archive shows bolts of three different lengths, 1", 1 1/4", and 1 3/4". I don't remember ever seeing 1 3/4 inch bolts. Which implements would require bolts of that length? Dan
- beaconlight
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
I would think when you have mower brackets doubled up with a draw bar brackets. I had mower brackets welded to low boy drawbar mountings when i bought my lowboy. At the time I had no idea what the mower brackst were. for. There was a cub cycle bar jury rigged to the low boy. You couldn't keep proper tension on the drive belt the way it was hooked up. I made a swap of cub mounting parts for lowboy parts with Tom at TM and burned and ground the mower brackets off. There is a set of the brackets of which I speak on Epay at the moment.
http://cgi.ebay.com/Farmall-Cub-Belly-M ... otohosting
Bill
http://cgi.ebay.com/Farmall-Cub-Belly-M ... otohosting
Bill
Bill
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
- Dale51
- 10+ Years
- Posts: 568
- Joined: Sun Aug 10, 2003 3:39 pm
- Location: Wellsville NY
This is the only place we found .
double bracket. see small yellow arrow on right.
They were also better when using the cub 22 mower
when attching the belly straps.
Sorry for the small pic. but trying to keep it so dial up can load fast.
If it's been broken I did it.
If its not broken wait till I touch it.
If its not broken wait till I touch it.
- Dan England
- Cub Pro
- Posts: 3094
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: 71770
- Location: AR, Waldo
- Scott
- 10+ Years
- Posts: 1194
- Joined: Sun Dec 26, 2004 7:09 pm
- Zip Code: 02769
- eBay ID: scottdarowski
- Tractors Owned: 48 Cub
55 Cub
62 CCO
63 CCO
70 JD 112 - Location: MA, Rehoboth
- Contact:
Who is online
Users browsing this forum: No registered users and 21 guests