This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
cam bearing
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 141
- Joined: Wed Apr 29, 2015 5:23 am
- Zip Code: 70785
- Tractors Owned: 1950AV Farm all High clearance
1952 Farm all Cub
1958 Farm all Cub
1959 Farm all Cub Lowboy
1951 Farm all Super A
1942Farm all B
1944Farmall B
2000Yanmar YM 2000
Gravely 5665
David Brown 880 - Location: Walker Louisiana
cam bearing
I am looking for a sset of cam bearings and can't find them am I missing them or what
-
- Team Cub Mentor
- Posts: 4127
- Joined: Tue Jan 11, 2005 12:12 pm
- Zip Code: 13830
- eBay ID: adak8965
- Circle of Safety: Y
- Location: Oxford, NY
Re: cam bearing
There are no replaceable bearings for the camshaft. The engine block was bored and polished and the cam turns on the polished surface. I have rebuilt a few of these engines and never needed to do anything on the cam. Is yours sloppy or are you just thinking you need to replace the "bearings"?
-
- 5+ Years
- Posts: 141
- Joined: Wed Apr 29, 2015 5:23 am
- Zip Code: 70785
- Tractors Owned: 1950AV Farm all High clearance
1952 Farm all Cub
1958 Farm all Cub
1959 Farm all Cub Lowboy
1951 Farm all Super A
1942Farm all B
1944Farmall B
2000Yanmar YM 2000
Gravely 5665
David Brown 880 - Location: Walker Louisiana
Re: cam bearing
I bought it and they had removed the cam bearings so I have to replace
-
- 10+ Years
- Posts: 603
- Joined: Wed Feb 19, 2014 1:09 pm
- Zip Code: 32736
- Tractors Owned: The crew:
"John", 1952 Cub
"Paul", 1951 Cub
"George", 1958 LoBoy Cub with Wagner 45 Loader
"Ringo", 1977 Cub
So far, Paul and Ringo have arrived. John and George were supposed to follow ages ago, but apparently have gone awol. Long story. - Circle of Safety: Y
Re: cam bearing
Ok, I think what we have here is a failure to communicate. We need pictures to clarify what you need. Once we see the parts you need or at least where it attaches, I'm sure the experts on this site will be able to point you in the right direction.
-
- Team Cub Mentor
- Posts: 20344
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: cam bearing
No cam bearings in a standard Cub C-60 engine block.
Measure/micrometer the cam journals and the cam bearing location as a double check.
There is a possibility that the cam bearing locations have been reamed and an insert applied - - - but I doubt it. May have the wrong cam for the engine, and any other number of possibilities.
Own the Operator's Manual, Parts Manual, and Service Manual.
Measure/micrometer the cam journals and the cam bearing location as a double check.
There is a possibility that the cam bearing locations have been reamed and an insert applied - - - but I doubt it. May have the wrong cam for the engine, and any other number of possibilities.
Own the Operator's Manual, Parts Manual, and Service Manual.
I have an excuse. CRS.
-
- Cub Pro
- Posts: 7504
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: cam bearing
Do you mean "crankshaft"bearings? Camshaft is the thin shaft, that runs the valves. Has no replaceable bearings. Crankshaft has replaceable bearings for the connecting rods, and also the 3 main bearings.
Ed
Ed
-
- 5+ Years
- Posts: 141
- Joined: Wed Apr 29, 2015 5:23 am
- Zip Code: 70785
- Tractors Owned: 1950AV Farm all High clearance
1952 Farm all Cub
1958 Farm all Cub
1959 Farm all Cub Lowboy
1951 Farm all Super A
1942Farm all B
1944Farmall B
2000Yanmar YM 2000
Gravely 5665
David Brown 880 - Location: Walker Louisiana
Re: cam bearing
this engine was taken apart by someone else tried the cam and it seems loose I will try to get pictures .The tractor was taken apart by someone in Houston and the owner before me told them he wanted it back like new . Well I am unsure what they did but they gave him a price of $5000.00 for the rebuild . He decided to do it his self and then lost interests . I will try to get the camera in to take a picture of what I am seeing
If they line boared the block to install cam bearings I guess I will have to figure out and get bearings for it ,I know most cam bearings are babin will brass be just as good
It is hard to repair something when you have never seen it together . It seams they have lost or they away the valve keys and some of the parts there also extra thanks to all Billy
If they line boared the block to install cam bearings I guess I will have to figure out and get bearings for it ,I know most cam bearings are babin will brass be just as good
It is hard to repair something when you have never seen it together . It seams they have lost or they away the valve keys and some of the parts there also extra thanks to all Billy
-
- 5+ Years
- Posts: 141
- Joined: Wed Apr 29, 2015 5:23 am
- Zip Code: 70785
- Tractors Owned: 1950AV Farm all High clearance
1952 Farm all Cub
1958 Farm all Cub
1959 Farm all Cub Lowboy
1951 Farm all Super A
1942Farm all B
1944Farmall B
2000Yanmar YM 2000
Gravely 5665
David Brown 880 - Location: Walker Louisiana
Re: cam bearing
Well I guess I am officially stupid . I went and tried to get pictures and the cam fit good .The only thing I think is I did not install all the way and jump conclusion . I have got to get it together better to rebuild this motor well I have started sorting nut& bolts and it looks like a job there just boxes full of parts so it is slow. thanks again for setting me right Billy
-
- Cub Pro
- Posts: 7504
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Who is online
Users browsing this forum: Glen and 25 guests