This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
carb inlet fittings
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- brichter
- Cub Pro
- Posts: 1521
- Joined: Sun Jul 11, 2004 2:23 pm
- Zip Code: 32449
- eBay ID: Kinardhippy
- Skype Name: Billy.Ray.Richter
- Circle of Safety: Y
- Location: FL, Kinard
carb inlet fittings
I have seen and even have a couple on some old cubs but I cannot find a source for the screw in fittings with the hose barb for the carb inlet. Could someone plese share a link to purchase these. I have ordered some compression fittings from TM but being an advocate of rubber fuel lines I like these fittings better.
If you're gonna dream or steal, do it BIG
The best things in life aren't things.
1951 Cub
1963 Corvair
lots more junk
The best things in life aren't things.
1951 Cub
1963 Corvair
lots more junk
-
- Team Cub
- Posts: 11817
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: carb inlet fittings
BR, We all throw those pipe thread fittings away when we helicoil them. Do you think we're going to tell you where to get them?
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- 10+ Years
- Posts: 4974
- Joined: Fri Oct 29, 2010 11:34 pm
- Zip Code: 36558
- Tractors Owned: Cubs: (3)'49's, (1 is for parts), (1)'57 IH Cub LoBoy w/FH, (2)154 Number Series Loboys, (1 is for parts), '76 Longstripe w/FH, Mowers: C-22, Bush Hog 412, Pennington 59, Woods RM42CF, Woods 42, assorted FCub plows, planters, discs, etc. OTHERS: '49 AC B & Ind. Sickle mower, '61 AC D12 Ser 2, '52 8N, '56 Ferguson 35 Deluxe, '47 & '49 Avery V, '53 MM BG (offset), '51 JD M (regular), '56 JD 420C, with Blade and fire plow, '85 JD 850 (Yanmar) w/72" belly mower, '76? Yanmar 2TR15 1500 & Bush Hog SQ42S-2 mower, '78? FORD Dexta, '86 FORD LGT14D & 48" Mower, (2)Cub Cadets & Mowers (MTD), (4) Sears Surburban's, other MTD mowers, Jeeps & other misc. "treasures"
- Circle of Safety: Y
- Location: AL (Southwest)
Re: carb inlet fittings
You can use a 1/2 x 20 fitting from a 5/16 brake line and tap the inside for 1/8 pipe, then use the barb fitting in it. I found that brass is easier to work with to cut the threads
Stan in LA (lower AL)
USAF & Reserves, Reg ARMY, ARMY NG (AL)
USAF & Reserves, Reg ARMY, ARMY NG (AL)
- brichter
- Cub Pro
- Posts: 1521
- Joined: Sun Jul 11, 2004 2:23 pm
- Zip Code: 32449
- eBay ID: Kinardhippy
- Skype Name: Billy.Ray.Richter
- Circle of Safety: Y
- Location: FL, Kinard
Re: carb inlet fittings
Bob, don't they make one of those types with UNF threads?
If you're gonna dream or steal, do it BIG
The best things in life aren't things.
1951 Cub
1963 Corvair
lots more junk
The best things in life aren't things.
1951 Cub
1963 Corvair
lots more junk
-
- Team Cub
- Posts: 11817
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: carb inlet fittings
I've never found one.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
- brichter
- Cub Pro
- Posts: 1521
- Joined: Sun Jul 11, 2004 2:23 pm
- Zip Code: 32449
- eBay ID: Kinardhippy
- Skype Name: Billy.Ray.Richter
- Circle of Safety: Y
- Location: FL, Kinard
Re: carb inlet fittings
Well, another one down the drain. Somewhere Mr. George Willer is laughing his butt off.
If you're gonna dream or steal, do it BIG
The best things in life aren't things.
1951 Cub
1963 Corvair
lots more junk
The best things in life aren't things.
1951 Cub
1963 Corvair
lots more junk
-
- Team Cub
- Posts: 11817
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: carb inlet fittings
BR, I just did a little more searching and found these. Edelmann 721560 (from Summit Racing), Kuriyama POFMIV-0405 (from Amazon). I've never seen either one, so I'm not sure if either will work or not.
Bob
Edit: If you have a 1/4"npt tap, Stan's solution may be easiest.
Bob
Edit: If you have a 1/4"npt tap, Stan's solution may be easiest.
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- 10+ Years
- Posts: 4974
- Joined: Fri Oct 29, 2010 11:34 pm
- Zip Code: 36558
- Tractors Owned: Cubs: (3)'49's, (1 is for parts), (1)'57 IH Cub LoBoy w/FH, (2)154 Number Series Loboys, (1 is for parts), '76 Longstripe w/FH, Mowers: C-22, Bush Hog 412, Pennington 59, Woods RM42CF, Woods 42, assorted FCub plows, planters, discs, etc. OTHERS: '49 AC B & Ind. Sickle mower, '61 AC D12 Ser 2, '52 8N, '56 Ferguson 35 Deluxe, '47 & '49 Avery V, '53 MM BG (offset), '51 JD M (regular), '56 JD 420C, with Blade and fire plow, '85 JD 850 (Yanmar) w/72" belly mower, '76? Yanmar 2TR15 1500 & Bush Hog SQ42S-2 mower, '78? FORD Dexta, '86 FORD LGT14D & 48" Mower, (2)Cub Cadets & Mowers (MTD), (4) Sears Surburban's, other MTD mowers, Jeeps & other misc. "treasures"
- Circle of Safety: Y
- Location: AL (Southwest)
Re: carb inlet fittings
Bob McCarty wrote:BR, I just did a little more searching and found these. Edelmann 721560 (from Summit Racing), Kuriyama POFMIV-0405 (from Amazon). I've never seen either one, so I'm not sure if either will work or not.
Bob
Edit: If you have a 1/4"npt tap, Stan's solution may be easiest.
I think I used a 1/8" pipe tap like this to make the adapter:
Obviously you have lots of options with the 1/8 npt thread adapter.
Stan in LA (lower AL)
USAF & Reserves, Reg ARMY, ARMY NG (AL)
USAF & Reserves, Reg ARMY, ARMY NG (AL)
-
- Team Cub
- Posts: 11817
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: carb inlet fittings
1/8" npt tap. Can't read and crs.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
- brichter
- Cub Pro
- Posts: 1521
- Joined: Sun Jul 11, 2004 2:23 pm
- Zip Code: 32449
- eBay ID: Kinardhippy
- Skype Name: Billy.Ray.Richter
- Circle of Safety: Y
- Location: FL, Kinard
Re: carb inlet fittings
The one from Amazon worked. Kuriyama POFMIV-0405 (from Amazon) .
If you're gonna dream or steal, do it BIG
The best things in life aren't things.
1951 Cub
1963 Corvair
lots more junk
The best things in life aren't things.
1951 Cub
1963 Corvair
lots more junk
- tnestell
- 10+ Years
- Posts: 594
- Joined: Mon Feb 03, 2003 2:01 am
- Zip Code: 48609
- Circle of Safety: Y
- Location: Mi, Saginaw
Re: carb inlet fittings
I have a carb that the inlet threads were bad. I used a a brake line and double flared the inlet line instead of using a compression fitting. I have taken that carb on and off several times and have never had a problem with it leaking. Not using the ferrule allowed the compression nut to seat new unused threads.
Who is online
Users browsing this forum: Garvin Gatewood and 19 guests