This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
C-2 Mower Belt and Parts
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 260
- Joined: Mon Jul 06, 2015 9:15 pm
- Zip Code: 39120
- Location: Mississippi, USA
C-2 Mower Belt and Parts
Since I've got the tractor running I'm looking at the mower deck with increased speculation. It's got an IH serial number tag but I didn't get the number off it yet. Went through the parts manuals and I'm 99% certain it's the International C-2 Rotary Mower because it has the lifting chain for center mounting. Looks like the belt is a part number IH-477180-R1 which is a 1/2"x138 13/1 according to all the online listings I've found. My first question is what the heck is the 13/1 at the end of the size specs? And next question is obviously where's the best source for parts and the belt. 3rd question is should I throw this old thing down the hill and try to find a different mower? at 42" that's the same cut size as the old MTD Yard Machine I mow with LOL, although granted it's not as much fun to drive and may or may not be able to cut as well.
IT Guy by day, Rockstar by night, Amateur tractor restorer on occasion
1949 Farmall Cub #94459 - Restoration Thread
"Organized chaos is better than no chaos at all"
1949 Farmall Cub #94459 - Restoration Thread
"Organized chaos is better than no chaos at all"
-
- 10+ Years
- Posts: 3425
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Re: C-2 Mower Belt and Parts
Can't answer first two questions, but third one- 42" mower will be the best all around mower for the cub in my opinion. Will do fine cutting your yard and will do some light bush hogging also. But understand with that said, I would only use one of these if I had a cub dedicated to its use. First year I used my cub, I'd change from mower to plow to dirt scoop to blade and back and forth and that's a pain in the butt. I now have a cub loboy for mowing
Thomas
-
- 5+ Years
- Posts: 230
- Joined: Thu Jul 10, 2014 7:18 am
- Zip Code: 24551
- Circle of Safety: Y
Re: C-2 Mower Belt and Parts
I just finished cutting a back field with my semi-refurbed C-2. Belt size is B136, buy it online at Amazon or a local Napa. Parts should be available from the local IH dealer or Messicks or C&G online. Did a great job for me, the 3/8 thick blades mean business. Also, when sharp they cut my lawn just as well as the mower decks on my old Wheel Horse and new Cub Cadet.
If you don't want to use yours, I'll buy the blades off of you provided they're in decent shape.
Picture from this past weekend, most of the stuff was over the hood.
If you don't want to use yours, I'll buy the blades off of you provided they're in decent shape.
Picture from this past weekend, most of the stuff was over the hood.
-
- 5+ Years
- Posts: 260
- Joined: Mon Jul 06, 2015 9:15 pm
- Zip Code: 39120
- Location: Mississippi, USA
Re: C-2 Mower Belt and Parts
I've had every intention of using the mower, that's really one of the main reasons we got it. Wasn't sure how well it cuts so glad to hear it does well. The blades are in atrocious condition. They've been ground down to probably a couple inches shorter. We don't have an IH dealer anywhere near us anymore. I'll check the online sources for them. The skid on one side is broken off but possibly could be welded back on if I can't find a replacement.
Does anyone know the part number for the blades, or if there's a common replacement for them that I can get from a tractor supply or something?
This is what it looks like right now
Does anyone know the part number for the blades, or if there's a common replacement for them that I can get from a tractor supply or something?
This is what it looks like right now
IT Guy by day, Rockstar by night, Amateur tractor restorer on occasion
1949 Farmall Cub #94459 - Restoration Thread
"Organized chaos is better than no chaos at all"
1949 Farmall Cub #94459 - Restoration Thread
"Organized chaos is better than no chaos at all"
-
- 5+ Years
- Posts: 230
- Joined: Thu Jul 10, 2014 7:18 am
- Zip Code: 24551
- Circle of Safety: Y
Re: C-2 Mower Belt and Parts
Blade part number is 474025R1. I've been looking at Agri Supply's website trying to match one up but no luck. Maybe a machine shop could modify an existing blade like the Kub Klipper thread suggested.
-
- 10+ Years
- Posts: 3425
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Re: C-2 Mower Belt and Parts
I have a deck I have no use for. You're welcome to it. Blades are decent, just need sharpening. Deck itself needs work. Overrunning clutch froze up. Email me at twm1963@yahoo.com and I'll send pics
Thomas
-
- 5+ Years
- Posts: 260
- Joined: Mon Jul 06, 2015 9:15 pm
- Zip Code: 39120
- Location: Mississippi, USA
Re: C-2 Mower Belt and Parts
That was a huge help Clip! Messicks and Coleman Equipment both show that part in stock for about $65 each
IT Guy by day, Rockstar by night, Amateur tractor restorer on occasion
1949 Farmall Cub #94459 - Restoration Thread
"Organized chaos is better than no chaos at all"
1949 Farmall Cub #94459 - Restoration Thread
"Organized chaos is better than no chaos at all"
-
- 5+ Years
- Posts: 260
- Joined: Mon Jul 06, 2015 9:15 pm
- Zip Code: 39120
- Location: Mississippi, USA
Re: C-2 Mower Belt and Parts
I got the blades off the mower today and it looks like maybe mine were swapped out for flail blades? they're in terrible shape but they look like they're long and sharpened on both sides so they're reversible? The original 474025R1 blade had a lift wing according to some pictures is that right? Going to pack these around to the local tractor supply stores and see if anyone has something that might fit
IT Guy by day, Rockstar by night, Amateur tractor restorer on occasion
1949 Farmall Cub #94459 - Restoration Thread
"Organized chaos is better than no chaos at all"
1949 Farmall Cub #94459 - Restoration Thread
"Organized chaos is better than no chaos at all"
-
- 5+ Years
- Posts: 33
- Joined: Thu Aug 27, 2015 3:04 pm
- Zip Code: 23831
Re: C-2 Mower Belt and Parts
I like my mower and use it for grass as well as light bush hogging. I love that cutter. However, it is a pain taking off and putting other implements on.
-
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Re: C-2 Mower Belt and Parts
Just a shot in the dark, but you might contact the New Holland Dealer in Alexandria, LA for a cross-reference on blades:
H&E Equipment Services, Inc.
64.64 mi
5732 S. Macarthur Drive
71302 - Alexandria, LA
Phone: (318) 443-7173
Fax: (318) 443-4844
cnichols@he-equipment.com
H&E Equipment Services, Inc.
64.64 mi
5732 S. Macarthur Drive
71302 - Alexandria, LA
Phone: (318) 443-7173
Fax: (318) 443-4844
cnichols@he-equipment.com
-
- 5+ Years
- Posts: 260
- Joined: Mon Jul 06, 2015 9:15 pm
- Zip Code: 39120
- Location: Mississippi, USA
Re: C-2 Mower Belt and Parts
I actually just got ahold of the Case/IH dealer Progressive Tractor between Ferriday and Jonesville LA which is about a half hour or so from Natchez and they do show the blades and the belt available. $70 each for the blades and $71 for the belt.
IT Guy by day, Rockstar by night, Amateur tractor restorer on occasion
1949 Farmall Cub #94459 - Restoration Thread
"Organized chaos is better than no chaos at all"
1949 Farmall Cub #94459 - Restoration Thread
"Organized chaos is better than no chaos at all"
-
- 10+ Years
- Posts: 3425
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
-
- 5+ Years
- Posts: 260
- Joined: Mon Jul 06, 2015 9:15 pm
- Zip Code: 39120
- Location: Mississippi, USA
Re: C-2 Mower Belt and Parts
Yes it is but given the choice of getting the new ones that actually fit when the rest of the deck is in really good shape, or ordering blindly online and probably not getting the right parts or getting tied up in a BS backorder queue while they pretend to track them down I just decided to get the right thing. I really do want to come take that deck off your hands T but having my truck and trailer and a free day to do it has just escaped me
IT Guy by day, Rockstar by night, Amateur tractor restorer on occasion
1949 Farmall Cub #94459 - Restoration Thread
"Organized chaos is better than no chaos at all"
1949 Farmall Cub #94459 - Restoration Thread
"Organized chaos is better than no chaos at all"
-
- 5+ Years
- Posts: 260
- Joined: Mon Jul 06, 2015 9:15 pm
- Zip Code: 39120
- Location: Mississippi, USA
Re: C-2 Mower Belt and Parts
A big shout out to Progressive Tractor in Jonesville, LA. Not only did they get my parts in right away but Ed Carter brought them with him back to Natchez to save me the trip. Not only that but when he got to town and realized my phone number wasn't on the invoice he punched my home address into his GPS and was on his way to hunt down my house to make sure I got them. Fortunately when he didn't call me by the expected time and I emailed him my number on the chance he might get emails on his phone, he did and called me right away and we were able to meet up. Belt and blades in hand and now I just need to clean and mount a few things and get my refurbed skids back and I'll be mowing!
IT Guy by day, Rockstar by night, Amateur tractor restorer on occasion
1949 Farmall Cub #94459 - Restoration Thread
"Organized chaos is better than no chaos at all"
1949 Farmall Cub #94459 - Restoration Thread
"Organized chaos is better than no chaos at all"
-
- 5+ Years
- Posts: 230
- Joined: Thu Jul 10, 2014 7:18 am
- Zip Code: 24551
- Circle of Safety: Y
Re: C-2 Mower Belt and Parts
Belts are available from NAPA as well for around $35, if I can remember.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5
- 150
-
by staninlowerAL
Mon Apr 24, 2023 8:53 pm
-
-
C3 - Mower - Cub - 1976 - Belt Keeps Falling Off Attachment(s)
by rtfosmoe » Fri Jul 23, 2021 6:23 pm » in Farmall Cub - 7
- 258
-
by john2189
Mon Jul 26, 2021 7:01 am
-
-
- 1
- 297
-
by tst
Sun May 16, 2021 9:35 am
-
- 4
- 185
-
by NJ Farmer
Sat Jul 08, 2023 10:29 pm
-
- 5
- 267
-
by staninlowerAL
Sat Nov 11, 2023 2:51 pm
Who is online
Users browsing this forum: No registered users and 1 guest