This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cub starting issues
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- BIGHOSS
- Cub Pro
- Posts: 1741
- Joined: Tue Jul 18, 2006 9:55 pm
- Zip Code: 37087
- Tractors Owned: 1947 Cub S/N 9216
w/ C-22 Mower
1974 Cub S/N 244814
w/59 Woods Mower
Ford 3000 Gas S/N C375091 w/Bushhog QT2345 Loader & 6' Squealer Bushhog
and a Palomino Mare named GIGI - Circle of Safety: Y
- Location: TN, Lebanon
Re: Cub starting issues
The cub J-4 mag has a slot on the bottom flange. It pivots on the top stud and moves in and out using the slotted hole on the bottom flange.
"Courage is being scared to death-but saddling up anyway".......John Wayne
- BIGHOSS
- Cub Pro
- Posts: 1741
- Joined: Tue Jul 18, 2006 9:55 pm
- Zip Code: 37087
- Tractors Owned: 1947 Cub S/N 9216
w/ C-22 Mower
1974 Cub S/N 244814
w/59 Woods Mower
Ford 3000 Gas S/N C375091 w/Bushhog QT2345 Loader & 6' Squealer Bushhog
and a Palomino Mare named GIGI - Circle of Safety: Y
- Location: TN, Lebanon
Re: Cub starting issues
Have you watched this: https://www.youtube.com/watch?v=QqucExhxXdE
"Courage is being scared to death-but saddling up anyway".......John Wayne
-
- 5+ Years
- Posts: 7
- Joined: Fri Jun 19, 2015 5:18 pm
- Zip Code: 53010
Re: Cub starting issues
Yes I've watched that and it was helpful until the point of rotating the mag. With the mag that has the top stud the pivot point Seems off and doesn't allow any movement of the mag due to the flange on The mag. I can rock it about 1/32" but that's all the movement I have.
-
- Team Cub
- Posts: 17214
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Cub starting issues
I suspect you have something other than a J-4 magneto. Can you post a picture?
Who is online
Users browsing this forum: No registered users and 22 guests