This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Mule Drive Question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 9
- Joined: Mon Feb 16, 2015 7:48 am
- Zip Code: 35976
Mule Drive Question
Can you use the same mule drive for a woods 42 and a bush hog 412.... I have the drive for the woods 42 mounted and it looks like should work with a few minor revisions and right size belt.... Thanks
- tmays
- 10+ Years
- Posts: 3411
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
-
- 5+ Years
- Posts: 9
- Joined: Mon Feb 16, 2015 7:48 am
- Zip Code: 35976
Re: Mule Drive Question
Where the mower mounts to the plates in back is about 3 inches too narrow.... just figured could use spacer and washers to make up the 1 1/2" on each side... just assuming though.... wondering if anyone has done it....
- tmays
- 10+ Years
- Posts: 3411
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Re: Mule Drive Question
Should not have to do that. But since apparently it doesn't match, then either something has been modified previously or that is not correct drive for that mower. Not familiar with bush hog brand mower. Is it possible that drive is for it?
Edit: you are mounting arms of mower to flanges on mule drive that have multiple holes in them?
Edit: you are mounting arms of mower to flanges on mule drive that have multiple holes in them?
Thomas
Who is online
Users browsing this forum: jobbyjim and 20 guests