This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cyl. Head Gasket
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Sailor
- 10+ Years
- Posts: 383
- Joined: Fri Mar 28, 2014 7:59 pm
- Zip Code: 42261
- Tractors Owned: 1948 Farmall Cub
Ser.# 16812
1938 Farmall F-14
Ser# 131806 - Circle of Safety: Y
- Location: KY, Morgantown
Cyl. Head Gasket
I was about to install the head when I noticed that the gasket has "this side OUT" inked on the side of the gasket that has ridges on it.
1. What does "out" refer to?
2. Which side of the gasket goes toward the block, the smooth side or the side with ridges?
Awaiting answers with torque wrench in hand!
Larry
1. What does "out" refer to?
2. Which side of the gasket goes toward the block, the smooth side or the side with ridges?
Awaiting answers with torque wrench in hand!
Larry
1948 Cub
Cub-22 Mower
Cub-54 Leveling & Grading Blade
Cub-144 Cultivator
Cub-189 Moldboard Plow (direct-Connected, One Bottom, Two-way)
Woods 59 Mower
Cub-22 Mower
Cub-54 Leveling & Grading Blade
Cub-144 Cultivator
Cub-189 Moldboard Plow (direct-Connected, One Bottom, Two-way)
Woods 59 Mower
-
- Cub Pro
- Posts: 7508
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: Cyl. Head Gasket
Side up, goes away from the block, towards the head.
Ed
Ed
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Cyl. Head Gasket
ScottyD'sdad wrote:Side up, goes away from the block, towards the head.
Ed
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Sailor
- 10+ Years
- Posts: 383
- Joined: Fri Mar 28, 2014 7:59 pm
- Zip Code: 42261
- Tractors Owned: 1948 Farmall Cub
Ser.# 16812
1938 Farmall F-14
Ser# 131806 - Circle of Safety: Y
- Location: KY, Morgantown
Re: Cyl. Head Gasket
ScottyD'sdad wrote:Side up, goes away from the block, towards the head.
Ed
So, "side up" means the same thing as "side out"?
Larry
1948 Cub
Cub-22 Mower
Cub-54 Leveling & Grading Blade
Cub-144 Cultivator
Cub-189 Moldboard Plow (direct-Connected, One Bottom, Two-way)
Woods 59 Mower
Cub-22 Mower
Cub-54 Leveling & Grading Blade
Cub-144 Cultivator
Cub-189 Moldboard Plow (direct-Connected, One Bottom, Two-way)
Woods 59 Mower
- Sailor
- 10+ Years
- Posts: 383
- Joined: Fri Mar 28, 2014 7:59 pm
- Zip Code: 42261
- Tractors Owned: 1948 Farmall Cub
Ser.# 16812
1938 Farmall F-14
Ser# 131806 - Circle of Safety: Y
- Location: KY, Morgantown
Re: Cyl. Head Gasket
Also, does the gasket go on "dry" without any sealant/gasket material?
1948 Cub
Cub-22 Mower
Cub-54 Leveling & Grading Blade
Cub-144 Cultivator
Cub-189 Moldboard Plow (direct-Connected, One Bottom, Two-way)
Woods 59 Mower
Cub-22 Mower
Cub-54 Leveling & Grading Blade
Cub-144 Cultivator
Cub-189 Moldboard Plow (direct-Connected, One Bottom, Two-way)
Woods 59 Mower
-
- Team Cub Mentor
- Posts: 20376
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Cyl. Head Gasket
Copper Coat, spray on type. That's what I use on both sides of the head gasket before installation.
I'm sure there are other quality gasket sealants.
I'm sure there are other quality gasket sealants.
I have an excuse. CRS.
- Sailor
- 10+ Years
- Posts: 383
- Joined: Fri Mar 28, 2014 7:59 pm
- Zip Code: 42261
- Tractors Owned: 1948 Farmall Cub
Ser.# 16812
1938 Farmall F-14
Ser# 131806 - Circle of Safety: Y
- Location: KY, Morgantown
Re: Cyl. Head Gasket
Eugene wrote:Copper Coat, spray on type. That's what I use on both sides of the head gasket before installation.
I'm sure there are other quality gasket sealants.
Thanks, Eugene.
Have you ever seen a Mahle gasket marked like I described above? The ridges I referred to is where they rolled the outer material, from one side, through the openings and pressed that material onto the other side. It looks like they used this method to seal the inner core from the outer cores.
1948 Cub
Cub-22 Mower
Cub-54 Leveling & Grading Blade
Cub-144 Cultivator
Cub-189 Moldboard Plow (direct-Connected, One Bottom, Two-way)
Woods 59 Mower
Cub-22 Mower
Cub-54 Leveling & Grading Blade
Cub-144 Cultivator
Cub-189 Moldboard Plow (direct-Connected, One Bottom, Two-way)
Woods 59 Mower
- bob in CT
- Team Cub Mentor
- Posts: 6018
- Joined: Thu Jun 07, 2007 9:34 am
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
- Location: CT, Manchester
Re: Cyl. Head Gasket
I suggest you re-torque the gasket. Let the tractor get completely warmed up, shut it down and let it cool completely and torque it again the next day. A pony tank is handy for this. Don't forget to service all the lube points under the hood while you have it off. fan hub, distributor/mag, genny, governor linkage, etc.
- Sailor
- 10+ Years
- Posts: 383
- Joined: Fri Mar 28, 2014 7:59 pm
- Zip Code: 42261
- Tractors Owned: 1948 Farmall Cub
Ser.# 16812
1938 Farmall F-14
Ser# 131806 - Circle of Safety: Y
- Location: KY, Morgantown
Re: Cyl. Head Gasket
Thanks for your inputs Bob.
1948 Cub
Cub-22 Mower
Cub-54 Leveling & Grading Blade
Cub-144 Cultivator
Cub-189 Moldboard Plow (direct-Connected, One Bottom, Two-way)
Woods 59 Mower
Cub-22 Mower
Cub-54 Leveling & Grading Blade
Cub-144 Cultivator
Cub-189 Moldboard Plow (direct-Connected, One Bottom, Two-way)
Woods 59 Mower
- bob in CT
- Team Cub Mentor
- Posts: 6018
- Joined: Thu Jun 07, 2007 9:34 am
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
- Location: CT, Manchester
Re: Cyl. Head Gasket
Those ridges are designed to crush to make your seals. A lot of people will tell you that copper kote is not required, but I bought a tractor that had a fresh rebuild and there was coolant weeping on to the top of the block. Mine never leaked. Use a non-hardening sealer (I use teflon paste) on the head bolts too. Those holes go right into the block and coolant can weep up the threads without sealer.
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Cyl. Head Gasket
Don't forget to use thread sealant on the head bolts, as some of them go into the water jacket and WILL leak if you do not.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Sailor
- 10+ Years
- Posts: 383
- Joined: Fri Mar 28, 2014 7:59 pm
- Zip Code: 42261
- Tractors Owned: 1948 Farmall Cub
Ser.# 16812
1938 Farmall F-14
Ser# 131806 - Circle of Safety: Y
- Location: KY, Morgantown
Re: Cyl. Head Gasket
John *.?-!.* cub owner wrote:Don't forget to use thread sealant on the head bolts, as some of them go into the water jacket and WILL leak if you do not.
I was pleasantly surprised that my bolts hadn't accumulated a lot of crud from being exposed to the coolant.
All good information, but I really need to know which side of the gasket goes toward the head....the side with the ridges or the smooth side.
Larry
1948 Cub
Cub-22 Mower
Cub-54 Leveling & Grading Blade
Cub-144 Cultivator
Cub-189 Moldboard Plow (direct-Connected, One Bottom, Two-way)
Woods 59 Mower
Cub-22 Mower
Cub-54 Leveling & Grading Blade
Cub-144 Cultivator
Cub-189 Moldboard Plow (direct-Connected, One Bottom, Two-way)
Woods 59 Mower
- bob in CT
- Team Cub Mentor
- Posts: 6018
- Joined: Thu Jun 07, 2007 9:34 am
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
- Location: CT, Manchester
Re: Cyl. Head Gasket
the side marked out goes up.
- Sailor
- 10+ Years
- Posts: 383
- Joined: Fri Mar 28, 2014 7:59 pm
- Zip Code: 42261
- Tractors Owned: 1948 Farmall Cub
Ser.# 16812
1938 Farmall F-14
Ser# 131806 - Circle of Safety: Y
- Location: KY, Morgantown
Re: Cyl. Head Gasket
bob in CT wrote:the side marked out goes up.
Thank you, very much.
Larry
1948 Cub
Cub-22 Mower
Cub-54 Leveling & Grading Blade
Cub-144 Cultivator
Cub-189 Moldboard Plow (direct-Connected, One Bottom, Two-way)
Woods 59 Mower
Cub-22 Mower
Cub-54 Leveling & Grading Blade
Cub-144 Cultivator
Cub-189 Moldboard Plow (direct-Connected, One Bottom, Two-way)
Woods 59 Mower
-
- 10+ Years
- Posts: 1068
- Joined: Sat Dec 10, 2005 4:31 pm
- Zip Code: 66839
- Circle of Safety: Y
- Location: KS. Burlington
Re: Cyl. Head Gasket
If you can read it , it is on right.
Who is online
Users browsing this forum: No registered users and 18 guests