This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Front Spindle Caster
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 31
- Joined: Mon Jul 16, 2007 8:06 pm
- Zip Code: 24382
- Tractors Owned: Two Farmall Cubs, two -Farmall Super C's, Case SC, Case VAC, and Case 300.
- Location: Wytheville, Virginia
Front Spindle Caster
Are the front axle spindles supposed to be vertical or are they supposed to have some castor toward the rear of the tractor? The right one on my tractor angles toward the front of the tractor and the left spindle seems to angle toward the rear. I was thinking maybe I had two left spindles on my tractor. I can't see that anything is bent. I know the front pedestal on my Farmall C angles toward the rear of the tractor.
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Re: Front Spindle Caster
They should slant slightly forward. This is determined by the holes in the inner tube and on the outer axle tube. Most likely the left side clamp has loosened and the pin and holes in the axle tubes are worn and elongated.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Front Spindle Caster
In addition to Bigdog's statement, the right and left spindles are the same.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
Who is online
Users browsing this forum: No registered users and 24 guests