This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Carb rebuild with Steiner kit

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
Stanton
Cub Pro
Cub Pro
Posts: 7760
Joined: Mon Jun 22, 2009 6:56 am
Zip Code: 64070
Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066
Circle of Safety: Y
Location: Lone Jack, MO

Re: Carb rebuild with Steiner kit

Postby Stanton » Fri Nov 21, 2014 12:30 pm

C.Montgomery wrote:Hello,
I'm new to the club. I picked up my first F-Cub today for $400. It's a 1953 and looks to be pretty tight as if it was not used hard or very much. The motor is stuck and I have the exhaust full of Marvel Mystery Oil, so we'll see? I drained the oil and about a quart of water came out and then some very thick oil. The old man I got it from said it has been stuck since February. I think I'm going to enjoy this little Cub very much. I will tackle the carb tomorrow and probably order a kit. Good luck with your carb job!
How do I attach a photo? Anybody?
Ya'll have a good one!


Welcome to the forum!

Agree with others about doing a thorough overall assessment prior to spending any (or much) money. FYI: check out the How-to section for info about posting pics. Basically, you'll need to upload them to a web-based site, then use the URL address to reference them into a thread here.

When you get it working, start a new thread, post some pics and introduce yourself. Again, welcome!
Stanton
Image Circle of Safety

SPONSOR AD

Sponsor



Sponsor
 

User avatar
Stanton
Cub Pro
Cub Pro
Posts: 7760
Joined: Mon Jun 22, 2009 6:56 am
Zip Code: 64070
Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066
Circle of Safety: Y
Location: Lone Jack, MO

Re: Carb rebuild with Steiner kit

Postby Stanton » Fri Nov 21, 2014 12:34 pm

C.Montgomery wrote:Hello,
I'm new to the club. I picked up my first F-Cub today for $400. It's a 1953 and looks to be pretty tight as if it was not used hard or very much. The motor is stuck and I have the exhaust full of Marvel Mystery Oil, so we'll see? I drained the oil and about a quart of water came out and then some very thick oil. The old man I got it from said it has been stuck since February. I think I'm going to enjoy this little Cub very much. I will tackle the carb tomorrow and probably order a kit. Good luck with your carb job!
How do I attach a photo? Anybody?
Ya'll have a good one!


Welcome to the forum! Check out the How-to section for info about posting pictures. Basically, you need to upload pics to a web-based site, then use that URL address linked into your post here.
Stanton
Image Circle of Safety

FarmallCubby1949
5+ Years
5+ Years
Posts: 64
Joined: Mon Nov 03, 2014 12:35 am
Zip Code: 15059
Tractors Owned: 1949 Farmall Cub (Rosco)
Serial # 68139
1957 Farmall Cub (Flash) Serial # 199918
1959 Farmall 130 (Bufford) Serial # 1507
1940 Farmall B (Uncle Jessie) Serial # 8696
1953 Farmall Super C (Sam)
Serial # 163814 J
1957 International 350 Utility (Tank) Serial # 8668 S
1946 Farmall M (Boss Hog)
1980 Wheel Horse Work Horse
2003 Sears Craftsman Lt
Woods 59 belly mower for Cub
Woods 59 belly mower for Super C
McCormick 1-F11 Two-Way Moldboard Plow for 130 (Fast-Hitch)
McCormick Cub Two-Way Moldboard Plow (Fast-Hitch)
McCormick Cub-38A Tractor Disk Harrow (Fast-Hitch)-(Cub/130)
McCormick Snow/Grader Blade for 130
McCormick Sickle Mower for 130
Location: Midland, (Ohioville) PA

Re: Carb rebuild with Steiner kit

Postby FarmallCubby1949 » Sun Nov 23, 2014 12:48 am

Don McCombs wrote:http://www.steinertractor.com/IHS825-farmall-cub-complete-carburetor-repair-kit?&TF=C30B10B5ABB6

Thank you Don for the link. I appreciate it very much. :)

FarmallCubby1949
5+ Years
5+ Years
Posts: 64
Joined: Mon Nov 03, 2014 12:35 am
Zip Code: 15059
Tractors Owned: 1949 Farmall Cub (Rosco)
Serial # 68139
1957 Farmall Cub (Flash) Serial # 199918
1959 Farmall 130 (Bufford) Serial # 1507
1940 Farmall B (Uncle Jessie) Serial # 8696
1953 Farmall Super C (Sam)
Serial # 163814 J
1957 International 350 Utility (Tank) Serial # 8668 S
1946 Farmall M (Boss Hog)
1980 Wheel Horse Work Horse
2003 Sears Craftsman Lt
Woods 59 belly mower for Cub
Woods 59 belly mower for Super C
McCormick 1-F11 Two-Way Moldboard Plow for 130 (Fast-Hitch)
McCormick Cub Two-Way Moldboard Plow (Fast-Hitch)
McCormick Cub-38A Tractor Disk Harrow (Fast-Hitch)-(Cub/130)
McCormick Snow/Grader Blade for 130
McCormick Sickle Mower for 130
Location: Midland, (Ohioville) PA

Re: Carb rebuild with Steiner kit

Postby FarmallCubby1949 » Thu Nov 27, 2014 3:08 pm

Don McCombs wrote:http://www.steinertractor.com/IHS825-farmall-cub-complete-carburetor-repair-kit?&TF=C30B10B5ABB6

Thanks Don. I appreciate that.


Return to “Farmall Cub”

Who is online

Users browsing this forum: Garvin Gatewood, muleboss and 39 guests