Polish Enginnering

Scott · Postby **Scott** » Wed Jul 13, 2005 3:36 pm

After not being able to locate a pressure rod my dad decided to make one. It came out pretty good. Have not tried it yet. Just painted it today.

Its the one thats on the right. hopefully it will Git-r-done.

Postby **Rudi** » Wed Jul 13, 2005 7:32 pm

Scotty:

Wow :!:

Looks pretty good. Nice paint job too :!:

I am surprised that you have had so much difficulty finding the pressure rods. I assume TM, JP were out and you were not the lucky bidder on eBay :?:

Be curious to know how these turn out....

Alan Riley · Postby **Alan Riley** » Wed Jul 13, 2005 9:29 pm

Scott, my reply has nothing to do with pressure rods but my curiosity has finally gotten the best of me. How did you come up with the name "Riley" for your 1948 Cub?

Alan Riley

Scott · Postby **Scott** » Wed Jul 13, 2005 9:31 pm

had a kitten named Riley that we found and gave it away and I had the name in my mind and then I checked baby name and it was in the top five.

Painless · Postby **Painless** » Wed Jul 13, 2005 9:45 pm

What is a pressure rod?

Postby **Rudi** » Wed Jul 13, 2005 10:10 pm

Painless:

Pressure rods come in pairs. They are used in conjunction with the rear lifting bar which is used to support and provide the lift for the rear tool bars in specific applications. One such application is the Cub-144 Cultivator.

I know that I use the lift bars in my Rudi's Hiller Project and I am assuming although I have not read all the literature on Cub Implements yet, that the Pressure Rods would have applications such as the Cub-252 Cultivator and a few others.

Hopefully Jim Becker or one of the other implement pros's will pop in and address the question.

There was also a thread which had links to TM Tractor's Gallery and a few other pages such as the CBI-1A Revision 12 Part's Manual, in the Cultivators section, but it is real late and time for noddling off for me... will try to add it tomorrow.

beaconlight · Postby **beaconlight** » Wed Jul 13, 2005 10:22 pm

Alan lots of Reilly in my family. Spelled different but said the same.

Bill

Painless · Postby **Painless** » Wed Jul 13, 2005 10:40 pm

Rudi,

Thanks for the quick reply. I figured pressure rods had something to do with some implement.

This is the friendliest site on the web, and my favorite :!:

Postby **Patbretagne** » Thu Jul 14, 2005 1:26 am

Painless wrote:Rudi,

Thanks for the quick reply. I figured pressure rods had something to do with some implement.

This is the friendliest site on the web, and my favorite

Or torture implements!

"Hey Orbits, get the pressure rods connected till he talks, after that he willsay exactly what we want, Hehhh Hoohhhh (Echoy laugh)"
Pat

Alan Riley · Postby **Alan Riley** » Thu Jul 14, 2005 9:44 pm

Scotty D wrote:had a kitten named Riley that we found and gave it away and I had the name in my mind and then I checked baby name and it was in the top five.

Thanks Scott. Now I know!

Alan

Farmall Cub

Polish Enginnering

Polish Enginnering

Who is online