TC pistons/Cylinders interchangeable ???

Tue Jul 01, 2014 8:39 pm

Does anybody know if the Pistons for the Touch Control block 351981R1 are the same as the piston from 360719R1?

Thanks,
Craig

Re: TC pistons/Cylinders interchangeable ???

Sun Oct 26, 2014 1:12 pm

Upon an investigation, led by myself, I would like it to be noted that the control valves on the 360 and 354 touch control block are different. the the 360 CV is about .001" bigger than the 354. This should be noted by anyone else, that if ever have damaged a control valve.

Re: TC pistons/Cylinders interchangeable ???

Sun Oct 26, 2014 8:54 pm

Check the parts book, if the numbers are the same, they will interchange

Re: TC pistons/Cylinders interchangeable ???

Sun Oct 26, 2014 9:28 pm

John, I've fixed this problem of mine, by the way, the control valves do not have any part #s for either block.

Re: TC pistons/Cylinders interchangeable ???

Sun Oct 26, 2014 9:40 pm

CraigKennedy wrote:John, I've fixed this problem of mine, by the way, the control valves do not have any part #s for either block.

Here are the numbers from the parts manual.

tc-piston.jpg
You do not have the required permissions to view the files attached to this post.