Hey guys…I decided to replace all of the knives on my flail mower this year and called Flail Master to place the order. I have all of my receipts of old purchases going back to 1999 from 3 different companies and the part number for the knife was always 101031. I placed the order and thought all was well…then about 4 days later I got a call from Flail Master saying that 101031 was an obsolete part number.
Any help with a part number? I know John *.?-!.* CubOwner replaced his knives last summer. I'm hoping somebody can give me a tip on a good supplier and a part number.
Thanks in advance.
Blair
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Part Number for Mott Flail Mower Knives
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Bigschuss
- 10+ Years
- Posts: 445
- Joined: Wed May 14, 2003 7:08 pm
- Zip Code: 01256
- Tractors Owned: 1984 JD 990
1953 JD 40S
1973 JD 300 Snowmobile - Location: Savoy, MA
Part Number for Mott Flail Mower Knives
I wish coke was still cola, and a joint was a bad place to be...
- Merle Haggard
- Merle Haggard
-
- 10+ Years
- Posts: 5189
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Part Number for Mott Flail Mower Knives
buy the wider blades from flailmaster, I think they are 1 1/4" wide, they fit right on in place of the 3/4" wide ones that were stock
Tim
Tim
-
- Team Cub
- Posts: 17242
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Part Number for Mott Flail Mower Knives
I don't know if this is your answer, but it is a step in the right direction.
I googled "mott 101031" and got this page, which says 101031 is obsolete and use 102086.
http://www.montageent.com/blades_fine.html
102086 has been mentioned in past threads, like this.
http://www.farmallcub.com/phpBB2/viewtopic.php?f=1&t=3360
Looks like 102086 may be a bit wider (and probably more expensive). If you find the right version of the Mott parts list, both knives are listed.
I googled "mott 101031" and got this page, which says 101031 is obsolete and use 102086.
http://www.montageent.com/blades_fine.html
102086 has been mentioned in past threads, like this.
http://www.farmallcub.com/phpBB2/viewtopic.php?f=1&t=3360
Looks like 102086 may be a bit wider (and probably more expensive). If you find the right version of the Mott parts list, both knives are listed.
-
- Team Cub Mentor
- Posts: 20344
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Part Number for Mott Flail Mower Knives
I have an excuse. CRS.
-
- Team Cub
- Posts: 17242
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Part Number for Mott Flail Mower Knives
Eugene wrote:http://flailmaster.com/our-products/
Near bottom of page, you can down load Flailmaster's catalog.
And if you do, you can find this entry for their # MH-386. The same page has pins and cotter pins.
Fine-Cut Blade
(102086/02988196)
Pin Mounted
.087” Thick
1 1/4” Wide
4.7” Tall
3/8” Mtg. hole
Qty. 1 to 249.................$0.62 ea
Qty. 250 to 499.............$0.56 ea
Qty. of 500 or more......$0.54 ea
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Part Number for Mott Flail Mower Knives
Jim and Eugene gave you the correct information the 101031 blade was both narrower and thinner, and if in fine grass gave a slightly smoother cut, but only nominally so. The 102086 is both wider and thicker, and lasts longer, especially for rough work. I quit using the thinner blades when the thicker ones became available several years ago.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
- Bigschuss
- 10+ Years
- Posts: 445
- Joined: Wed May 14, 2003 7:08 pm
- Zip Code: 01256
- Tractors Owned: 1984 JD 990
1953 JD 40S
1973 JD 300 Snowmobile - Location: Savoy, MA
Re: Part Number for Mott Flail Mower Knives
Thanks gentlemen. Just what I was look for. Much appreciated.
Blair
Blair
I wish coke was still cola, and a joint was a bad place to be...
- Merle Haggard
- Merle Haggard
Who is online
Users browsing this forum: Jeff Silvey, Mike in Louisiana, tobaccoman and 29 guests