This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Clutch soaking
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 8
- Joined: Fri Apr 25, 2014 8:15 pm
- Zip Code: 45011
- Tractors Owned: ONE yes for now just one IH cub that needs a lot of work.
1971 cub - Location: Liberty twp ohio 45011
Clutch soaking
Hello all. We are about to put a clutch in the 75 cub and my friend said he thought we had to soak the clutch in something. Does anybody know anything about this. Please let me know. Thanks JIM
-
- 10+ Years
- Posts: 327
- Joined: Mon Dec 08, 2008 8:28 pm
- Zip Code: 65018
- Tractors Owned: 1947 cub #11248
1948 #39811 trimmed dash
1950 VAC Case - Circle of Safety: Y
- Location: MO California
- Contact:
Re: Clutch soaking
Do not soak the clutch! It is the trow out bearing that need to be well soaked in light oil. Some will say the longer it soaks the better. I'm sure more to come on this subject.
-
- Team Cub
- Posts: 11858
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Clutch soaking
Also make sure that you pump grease into the zerc until it comes out the weep hole on the opposite side. You want to use a cheap (low temperature) grease that will break down and flow through the graphite. The Case/IH TOB used to come in a plastic bag and you could tell that they were "pre-oiled". If it didn't come that way, do as midmo suggested. Also, make sure you adjust the fingers after the pressure plate is attached to the flywheel.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Clutch soaking
In addition to what has already been said, the supposedly pre-adjusted pressure plates are not properly adjusted.Bob McCarty wrote:.......Also, make sure you adjust the fingers after the pressure plate is attached to the flywheel. Bob
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
Who is online
Users browsing this forum: No registered users and 45 guests