Howdy:
Acquired this 61 cub, not too familiar with the rear cultivating equipment setup.
Does it look like a standard issue, and if so, does anyone know what the model etc. is?
Planning to use it on crops this year,
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Help I.D. 1961 cub tool bar setup
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 37
- Joined: Thu Jul 07, 2011 6:23 am
- Zip Code: 04353
- Location: Maine USA
Help I.D. 1961 cub tool bar setup
- Attachments
-
- IMG_1666_1.JPG (174.32 KiB) Viewed 206 times
-
- IMG_1665_1.JPG (147.05 KiB) Viewed 206 times
1948 Farmall Super AV
1961 Cub
1964 International B275
1947 International KB-5 Dump Truck
1968 F-250 plow truck
Other Stuff
1961 Cub
1964 International B275
1947 International KB-5 Dump Truck
1968 F-250 plow truck
Other Stuff
- AL Farmall Boy
- 10+ Years
- Posts: 2555
- Joined: Tue Aug 10, 2010 6:38 pm
- Zip Code: 35630
- Circle of Safety: Y
Re: Help I.D. 1961 cub tool bar setup
I'm not very familiar with them, but are those parts to a 2 way plow? I do recognize the standard drawbar in there.
If cultivating, you'd have to completely remove all of those pieces.
If cultivating, you'd have to completely remove all of those pieces.
Regards,
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
Chase
205-368-5339
ihfarmallrtr@gmail.com
Follow my page "Alabama Tractor Pickers" on YouTube & Facebook!
-
- 10+ Years
- Posts: 2929
- Joined: Sun Apr 19, 2009 9:51 pm
- Zip Code: 63664
- Location: MO, Potosi
Re: Help I.D. 1961 cub tool bar setup
Looks like parts to a 189 two way plow to me also. I see the lower end of a depth lever and a dogbone and an eyebolt in the drawbar. Should be another dog bone and eyebolt for the other side I believe. As well as the drawbar has been turned around to the normal position but only has one bolt in it to keep it from hingeing. Don't put much weight on it without adding the other bolt. Also the part of the latching mechanism to hold one side up while using the other, and the chain hooks on the rear rockshaft.
There should be a manual and parts list in the manual section above.
I'll bet that stuff would sell pretty easily, or you are well on your way to assembling a two way plow. Either way your ahead
There should be a manual and parts list in the manual section above.
I'll bet that stuff would sell pretty easily, or you are well on your way to assembling a two way plow. Either way your ahead
- Boss Hog
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Help I.D. 1961 cub tool bar setup
you have NO cultivating equipment there! only parts of a depth lever for a plow
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg