lost tools at va fest

Sat May 03, 2014 8:29 pm

Did anyone by mistake put an 8 inch crescent wrench or a 10 inch crescent wrench or a large brass drift or a pair of blue handle dikes in their tool box by mistake?
Many thanks Boss

Re: lost tools at va fest

Sat May 03, 2014 9:26 pm

Boss, I'll double check my tool box tomorrow when I go to the farm to do some mowing...but all my tools have yellow tape on them. I will let you know...good luck!

Re: lost tools at va fest

Sat May 03, 2014 9:33 pm

Wish I could help. I don't know what dikes are! :-)

Re: lost tools at va fest

Sat May 03, 2014 9:57 pm

tmays wrote:Wish I could help. I don't know what dikes are! :-)


Side cutter pliers

Re: lost tools at va fest

Sat May 03, 2014 9:58 pm

Short for "diagonal cutters" = wire cutters.

Re: lost tools at va fest

Sat May 03, 2014 10:12 pm

Boss
I checked my tool box and they are not there. I like Dale's idea of putting colored tape on her wrenches. I may have to try that.

Re: lost tools at va fest

Sun May 04, 2014 6:45 am

The last I saw , the brass drift was being used to drive out the bearings in the transmision rebuild and I belive the dikes were used on the ignition switch wire for the 6 to 12 volt conversion. This might help jog sombodies memmory. Not sure about the crescent wrenches.

Re: lost tools at va fest

Sun May 04, 2014 8:17 am

The punch "disappeared" from the tranny job, while we were at lunch. Needed it again, and had to make do with another punch.
Ed

Re: lost tools at va fest

Sun May 04, 2014 1:20 pm

sorry for the tool misplacement. but I did learn what dikes were.

Re: lost tools at va fest

Sun May 04, 2014 1:42 pm

hpierce wrote:Boss
I checked my tool box and they are not there. I like Dale's idea of putting colored tape on her wrenches. I may have to try that.


Yea but one year at DSCF some one else used yellow tape also, right Dale.

Re: lost tools at va fest

Sun May 04, 2014 6:33 pm

Boss, checked the tractor you did the conversion from Mag 6 volt to 12 volt distributor, No tools.
But Jenny is running like a fine machine thanks to your magic.

Re: lost tools at va fest

Sun May 04, 2014 7:24 pm

Wagon19 wrote:Boss, checked the tractor you did the conversion from Mag 6 volt to 12 volt distributor, No tools.
But Jenny is running like a fine machine thanks to your magic.


You are more than welcome

Re: lost tools at va fest

Mon May 05, 2014 8:56 am

The easy way to find them is to go out and buy new ones.

Re: lost tools at va fest

Mon May 05, 2014 11:27 am

Matt Kirsch wrote:The easy way to find them is to go out and buy new ones.
:lol: :lol: :lol:

Re: lost tools at va fest

Mon May 05, 2014 12:28 pm

boss the lost tools are in the same place my lost tag is! did you check the dog?