Need Napa part number for a 6 volt voltage regulator, The type that bolts/mounts on the generator?
It's for a farmall H I think the one's for a cub would probably be the same. Thanks Dave F.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Need Napa Part Number
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 518
- Joined: Fri Feb 07, 2003 12:36 pm
- Location: WV, Morgantown
-
- 10+ Years
- Posts: 5206
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
- LeeC
- 10+ Years
- Posts: 343
- Joined: Fri Oct 31, 2008 2:07 pm
- Zip Code: 22150
- Tractors Owned: 2 1962 LoBoys
1 1964 LoBoy
1 1965 LoBoy
1 1966 LoBoy - Circle of Safety: Y
- Location: Springfield, VA
Re: Need Napa Part Number
VR214 is the Standard Motor Products number
VR851 is the Napa Part Number
They are both the same, made in the USA Regulators. The VR214/VR851 is a flat based regulator. Are you looking for a saddle mounted that bolts directly to the generator?
VR851 is the Napa Part Number
They are both the same, made in the USA Regulators. The VR214/VR851 is a flat based regulator. Are you looking for a saddle mounted that bolts directly to the generator?
-
- 10+ Years
- Posts: 518
- Joined: Fri Feb 07, 2003 12:36 pm
- Location: WV, Morgantown
Re: Need Napa Part Number
I need the saddle mount. Thanks Dave F.
- LeeC
- 10+ Years
- Posts: 343
- Joined: Fri Oct 31, 2008 2:07 pm
- Zip Code: 22150
- Tractors Owned: 2 1962 LoBoys
1 1964 LoBoy
1 1965 LoBoy
1 1966 LoBoy - Circle of Safety: Y
- Location: Springfield, VA
Re: Need Napa Part Number
VR213 - Standard Products
VR850 - NAPA (Echlin)
This is a 4 terminal, 6 volt regulator (three on the side, one underneath). If you need a cutout vs. regulator, I think it has less terminals. I do not have anything that takes a cutout, so I do not know too much about them.
VR850 - NAPA (Echlin)
This is a 4 terminal, 6 volt regulator (three on the side, one underneath). If you need a cutout vs. regulator, I think it has less terminals. I do not have anything that takes a cutout, so I do not know too much about them.
Who is online
Users browsing this forum: No registered users and 40 guests