This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Head Bolts
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 553
- Joined: Sat Dec 07, 2013 12:36 pm
- Zip Code: 36578
- Tractors Owned: 49 Farmall Cub
1959 Farmall Cub
2005 Massey Ferguson 1528 - Circle of Safety: Y
- Location: AL, Stapleton
Head Bolts
My engine was rebuilt at a local machine shop but I have discovered that they did not put sealant on the threads of the head bolts. I want to add the sealant. Can I remove the bolts one at a time and reinstall them and torque them as I put them back in or do I need to remove them all and go through the proper sequence to torque them all? I will be using new head bolts. I was concerned that I might have a problem with the head gasket if I remove all of the bolts at the same time.
-
- Team Cub Mentor
- Posts: 20377
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Head Bolts
One bolt at a time. Torque down. When finished, recheck the torque on all head bolts.
I have an excuse. CRS.
- Dale Finch
- 10+ Years
- Posts: 6684
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Head Bolts
Curious...what sealant will you be using? The Copper ? stuff? Spray or is there a brush on? Thanks, because I think the shop that did mine may have done the same thing, and I was going to also remove one at a time to coat them.
-
- Team Cub Mentor
- Posts: 20377
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
- twotone
- 10+ Years
- Posts: 1189
- Joined: Sat May 14, 2011 6:09 pm
- Zip Code: 15132
- Tractors Owned: 53 F Cub
73 F Cub
53 Super A With Snow/Grader Blade
193 Plow With Colter And Jointer
144 Cultivators
22 Mower - Circle of Safety: Y
- Location: Versailles,Pa.
Re: Head Bolts
I use Permatex non hardening in the tube.
Know Your Cub, And Your Cub Will Know You.
Tom
Tom
-
- 10+ Years
- Posts: 553
- Joined: Sat Dec 07, 2013 12:36 pm
- Zip Code: 36578
- Tractors Owned: 49 Farmall Cub
1959 Farmall Cub
2005 Massey Ferguson 1528 - Circle of Safety: Y
- Location: AL, Stapleton
Re: Head Bolts
I will be using one that the case dealer recommended and sold me I'll have to look at it and let you know what it is.
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Head Bolts
if you have coolant in the engine you need to drain it first. At leas partway or you will get a nice fountain.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
Who is online
Users browsing this forum: No registered users and 54 guests