I made a good tool to remove the Regulator Valve Seat on my touch control.
Just take an old wood chisel that will fit inside the cylinder and grind the sharp end off flat , making it look like a large screwdriver.
Then, after inserting it in the Regulator Valve Seat take a Crescent wrench and turn it while pushing down and Voila !
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Regulator Valve Seat tool
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 49
- Joined: Thu Jan 16, 2014 9:19 am
- Zip Code: 31793
- Stanton
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Who is online
Users browsing this forum: No registered users and 43 guests