Finally had a chance today to go back and check out my Touch Control problem on my 1951 Cub.
Like I said in a previous post, when I move the lever back quickly and forward quickly, the lift goes up and down smoothly.
However, when I move the lever slowly to the back, everything starts jumping just like air in in the hydrolics.
So, I took the fill bolt out and let the tractor idle while I ran the lift up and down........ did it 200 times (yes, I counted).
Still jumps around when the lever goes backwards or when the lever is over 50% toward the back.
Any ideas? Doesn't appear to be air.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Touch Control
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 2917
- Joined: Sat Feb 11, 2006 5:26 pm
- Location: NC
Re: Touch Control
Try adjusting ALL the linkage involved according to the genuine service manual.
Luck favors those who are prepared
-
- 10+ Years
- Posts: 49
- Joined: Thu Jan 16, 2014 9:19 am
- Zip Code: 31793
Re: Touch Control
Checked all as suggested. Still not working.
I opened the touch control back up. The only item I wonder about is if there is something that is supposed to come out of the housing where 18, 19 and 20 in this diagram fit into the block. http://www.cleancomputes.com/Cub/Blue%2 ... ontrol.htm
Anybody know?
I opened the touch control back up. The only item I wonder about is if there is something that is supposed to come out of the housing where 18, 19 and 20 in this diagram fit into the block. http://www.cleancomputes.com/Cub/Blue%2 ... ontrol.htm
Anybody know?
-
- 10+ Years
- Posts: 49
- Joined: Thu Jan 16, 2014 9:19 am
- Zip Code: 31793
Re: Touch Control
I think I'm narrowing this problem down. When I pulled everything out of the block, I found that number 18 or page 30 of this service manual is sticking and doesn't slide up and down correctly. http://www.cleancomputes.com/Cub/Blue%2 ... ontrol.htm
However, I can't seem to find what to do to fix the problem. What is under this in the block?
However, I can't seem to find what to do to fix the problem. What is under this in the block?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4
- 273
-
by Bill V in Md
Thu Feb 10, 2022 9:55 pm
-
- 5
- 1115
-
by Glen
Thu Dec 28, 2023 6:35 pm
-
-
Should this be used with touch control Attachment(s)
by cowridermi » Sun May 14, 2023 2:41 pm » in Farmall Cub - 2
- 236
-
by radioguy41
Sun May 14, 2023 5:07 pm
-
-
- 0
- 89
-
by Tristan55555
Thu Apr 11, 2024 1:07 pm
-
- 30
- 1139
-
by LyleDoe
Sun Mar 13, 2022 10:58 am
Who is online
Users browsing this forum: No registered users and 3 guests