This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Starts and Stops

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
farmalldean
10+ Years
10+ Years
Posts: 25
Joined: Sun Feb 22, 2009 3:52 pm
Zip Code: 97846
Tractors Owned: Cub 1957
Super A 1950
Location: Joseph, OR 97846

Starts and Stops

Postby farmalldean » Wed Mar 12, 2014 1:02 pm

My 57 Cub starts and will run about 1-2 sec and stops. Yesterday I changed the plugs because of a miss (put Champion D18Y in). The old plugs were about 10-12 yrs old and shot. Started up and she purred like a kitten so I decided to go for a ride. The ride only lasted about 100 yds and she quit. She starts and runs about 1-2 sec and quits. I removed the float chamber plug and gas runs from the tank through the carb just fine so it's not a fuel supply issue. Seems I had similar problem about 10 years ago and it was the condenser. Any suggestions?? :thanx:

SPONSOR AD

Sponsor



Sponsor
 

User avatar
tmays
10+ Years
10+ Years
Posts: 3408
Joined: Wed May 11, 2011 8:59 pm
Zip Code: 39154
Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H
Location: Raymond, MS

Re: Starts and Stops

Postby tmays » Wed Mar 12, 2014 1:06 pm

May be a piece of trash in the main jet
Thomas

snoman7c
10+ Years
10+ Years
Posts: 70
Joined: Sun Jan 05, 2014 8:56 am
Zip Code: 15909
Tractors Owned: 1951 Farmall Cub
Circle of Safety: Y
Location: Johnstown, Pennsylvania

Re: Starts and Stops

Postby snoman7c » Wed Mar 12, 2014 2:03 pm

I had a similar problem with my Cub last fall. After days and days of trouble shooting AND Great guidence from the greatest Cub info forum on the planet, I found that the wire from the condenser was loose on the stud that it mounts on in the distributor! I reattached it and had it purring like a BMW ! Hope this sheds some light on your problem :)

farmalldean
10+ Years
10+ Years
Posts: 25
Joined: Sun Feb 22, 2009 3:52 pm
Zip Code: 97846
Tractors Owned: Cub 1957
Super A 1950
Location: Joseph, OR 97846

Re: Starts and Stops

Postby farmalldean » Wed Mar 12, 2014 3:13 pm

It is purring again! Went for ride after removing the Main Jet, blowing it out and reinstalling. Started right up. Thanks, Tom and Don for the advice, as I was about to dig into the distributor. Last year, based on advice from the Forum, I replaced the float valve with a Kohler engine float valve and stopped the carb from leaking gas which had been going on since the early 90's.
The Forum has been invaluable in keeping the SA and Cub in tip top shape and able to work around the ranch. I couldn't make it without their help and your help. Thanks Again to all of you.
Dean

User avatar
tmays
10+ Years
10+ Years
Posts: 3408
Joined: Wed May 11, 2011 8:59 pm
Zip Code: 39154
Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H
Location: Raymond, MS

Re: Starts and Stops

Postby tmays » Wed Mar 12, 2014 3:24 pm

Glad you got her going Dean
Thomas

Smokeycub
10+ Years
10+ Years
Posts: 1050
Joined: Tue Apr 26, 2011 10:47 am
Zip Code: 44266
Tractors Owned: 48 F Cub #11678
65 Cub Cadet 104
70 450C JD loader
67 Cub Cadet 107
90 B7100HST-D Kubota
72 Cub Cadet 149
54 Super C
Circle of Safety: Y
Location: Ravenna, Ohio

Re: Starts and Stops

Postby Smokeycub » Thu Mar 13, 2014 9:46 am

Glad you got it going! it's always the simple stuff. ...and it's a great feeling when you figure it out! :coffee:
Ray
Smokeycub
Attachments - 193 plow - 144 cultivator - 22 mower - 28A disc harrow - 54 leveling blade - Woods 59C2 - drag harrows - Mott D9 flail - flat belt pulley
Image
The squeaky wheel may get the grease but it's usually the first to be replaced!


Return to “Farmall Cub”

Who is online

Users browsing this forum: Bill V in Md and 29 guests